SANAT
GÜZELLİK & SAĞLIK
ZANAAT
KÜLTÜR & TARİH
EĞLENCE
ÇEVRE
YİYECEK & İÇECEK
TERS MÜHENDİSLİK
BİLİMLER
SPOR
TEKNOLOJİ
GİYİLEBİLİR ÜRÜNLER
Greensand Casting Sand
Forge

Oluşturan

Forge

11. Ekim 2026NO
21
0
0
0
0

Greensand Casting Sand

Green sand is moulding sand that is used damp: fine silica sand bound by a little clay and water, so it packs firm round a pattern, holds a sharp shape, and lets steam escape when hot metal is poured. 'Green' means unbaked, not the colour. Bentonite clay is the usual binder; the mix is tempered with water until a squeezed handful holds its shape and breaks cleanly.
Başlangıç
1 hour

Talimatlar

1

Sieve the sand

With a dust mask on, sieve dry fine quartz sand to remove stones and lumps.

Bu adım için malzemeler:

Kuvars KumuKuvars Kumu20 kg

Gerekli aletler:

İnce Gözlü Elekİnce Gözlü Elek
Toz MaskesiToz Maskesi
2

Add the clay

Weigh in bentonite at about a tenth of the sand's weight and mix it through dry in the trough until the colour is even.

Bu adım için malzemeler:

Bentonit kiliBentonit kili2 kg

Gerekli aletler:

TartıTartı
Harç teknesiHarç teknesi
Toz MaskesiToz Maskesi
3

Temper with water

Mist water over it a little at a time, rubbing the sand between your hands and through the sieve to spread the clay and water evenly.

Bu adım için malzemeler:

SuSu1 litre

Gerekli aletler:

Su püskürtme şişesiSu püskürtme şişesi
İnce Gözlü Elekİnce Gözlü Elek
4

Squeeze test

Squeeze a handful. It should hold the print of your fingers and break cleanly in two when bent, not crumble or stick to your hand. Add sand if sticky, water if crumbly.
5

Store damp

Keep it covered in a lidded bucket so it stays damp; re-temper before each use.

Gerekli aletler:

Kapaklı metal kovaKapaklı metal kova

Malzemeler

3
  • Yer Tutucu
  • Yer Tutucu
  • 1 litre
    Yer Tutucu

Gerekli Aletler

6

CC0 Kamu Malı

Bu plan CC0 lisansıyla yayınlanmıştır. İzin almadan kopyalayabilir, değiştirebilir, dağıtabilir ve herhangi bir amaçla kullanabilirsiniz.

Planı üzerinden ürün satın alarak Maker'ı destekleyin, böylece Maker Komisyonu Satıcılar tarafından belirlenen komisyonu kazanırlar veya bu Planın yeni bir versiyonunu oluşturun ve gelir paylaşımı için kendi Planınıza bağlantı olarak ekleyin.

Tartışma

(0)

Giriş yapın tartışmaya katılmak için

Yorumlar yükleniyor...