İşbirliği
SANAT
GÜZELLİK & SAĞLIK
ZANAAT
KÜLTÜR & TARİH
EĞLENCE
ÇEVRE
YİYECEK & İÇECEK
TERS MÜHENDİSLİK
BİLİMLER
SPOR
TEKNOLOJİ
GİYİLEBİLİR ÜRÜNLER
Martingale: Neck Strap and Slit Breast Strap With Rings (Hasluck, Saddlery, 1904)
Tex

Oluşturan

Tex

13. Kasım 2026FO
2
0
0
0
0

Martingale: Neck Strap and Slit Breast Strap With Rings (Hasluck, Saddlery, 1904)

A martingale runs from the girth up between the horse's forelegs and stops it throwing its head too high. This is the martingale from Paul N. Hasluck's Saddlery (1904), as in his Fig. 11: a neck strap about 4 ft 6 in long, and a breast strap slit at the top into two branches, each ending in a ring for the reins. Every size is his; he does not give the size of the rings.
Orta
About 1 day

Talimatlar

1

His sizes in centimetres

Jupyter defteri yükleniyor…
2

Read Saddlery, ch. V

"Martingales (Fig. 11) are made with straps round the neck, either flat or round, and with or without a buckle; the total length is about 4 ft. 6 in., and the flat strap is 3/4 in. wide."
3

Make the neck strap

Cut the neck strap about 4 ft 6 in long and 3/4 in wide. With a buckle: place a piece of leather about 1 ft 3 in from the buckle for the breast strap and stitch it at both ends, so it makes an opening. Round the rest of the neck strap, leaving about 1 ft flat for a 3/4 in buckle. Without a buckle, make the opening by simply overlapping the ends, leaving enough space between the two splices for the breast strap.

Bu adım için malzemeler:

Koşum derisiKoşum derisi1 adet
KordonKordon1 adet
Dilli demir tokaDilli demir toka1 adet
Keten iplikKeten iplik1 adet
BalmumuBalmumu1 adet

Gerekli aletler:

Deri bıçağıDeri bıçağı
Oluklu tahtaOluklu tahta
Kenar pahlama aletiKenar pahlama aleti
Deri kenar perdahlayıcıDeri kenar perdahlayıcı
Kıvırma aletiKıvırma aleti
Propan PürmüzPropan Pürmüz
BizBiz
İki saraç iğnesiİki saraç iğnesi
Saraç mengenesiSaraç mengenesi
Şerit MetreŞerit Metre
4

Cut and slit the breast strap

Cut the breast strap 1-1/4 in wide and 4 ft long and slit it for 1 ft 1 in. It may be flat or round; a round one must be cut wider to begin with, say 1-5/8 in, and then slit in half.

Bu adım için malzemeler:

Koşum derisiKoşum derisi1 adet

Gerekli aletler:

Deri bıçağıDeri bıçağı
Şerit MetreŞerit Metre
5

Make the girth loop

For a flat strap, narrow it at the unslit end for 1 ft 6 in from the end. Fix a 1 in buckle there the reverse way and buckle the strap back on itself to form a loop for the girth. Fit this buckle before the rings.

Bu adım için malzemeler:

Dilli demir tokaDilli demir toka1 adet
Keten iplikKeten iplik1 adet
BalmumuBalmumu1 adet

Gerekli aletler:

Deri bıçağıDeri bıçağı
Kenar pahlama aletiKenar pahlama aleti
Deri kenar perdahlayıcıDeri kenar perdahlayıcı
Kıvırma aletiKıvırma aleti
Propan PürmüzPropan Pürmüz
BizBiz
İki saraç iğnesiİki saraç iğnesi
Deri delme zımbasıDeri delme zımbası
6

Put on the rings and finish

Put a ring on the end of each slit branch, as in Fig. 11; he does not give the ring size. Then run the buckle end of the breast strap through the opening in the neck strap, and the martingale is complete.

Bu adım için malzemeler:

Koşum halkasıKoşum halkası2 adet
Keten iplikKeten iplik1 adet
BalmumuBalmumu1 adet

Gerekli aletler:

Deri bıçağıDeri bıçağı
BizBiz
İki saraç iğnesiİki saraç iğnesi
Saraç mengenesiSaraç mengenesi
7

Troubleshooting

Martingale troubleshooting.

Flow

Loading...
8

History and honest limits

From **Saddlery**, edited by Paul N. Hasluck, David McKay, 1904 (archive.org saddlery00hasl), chapter V, martingales, pp. 45-47, Fig. 11 on p. 43; every fraction was read on the scan. He names the rings but gives no size for them, and does not say how they are fixed to the branches: follow Fig. 11. The combined martingale and breastplate on p. 45 is not made here. The thread, tools and metric figures are ours.

Malzemeler

6

Gerekli Aletler

11

Bu planla yapılan

CC0 Kamu Malı

Bu plan CC0 lisansıyla yayınlanmıştır. İzin almadan kopyalayabilir, değiştirebilir, dağıtabilir ve herhangi bir amaçla kullanabilirsiniz.

Planı üzerinden ürün satın alarak Maker'ı destekleyin, böylece Maker Komisyonu Satıcılar tarafından belirlenen komisyonu kazanırlar veya bu Planın yeni bir versiyonunu oluşturun ve gelir paylaşımı için kendi Planınıza bağlantı olarak ekleyin.

Tartışma

(0)

Giriş yapın tartışmaya katılmak için

Yorumlar yükleniyor...