İşbirliği
SANAT
GÜZELLİK & SAĞLIK
ZANAAT
KÜLTÜR & TARİH
EĞLENCE
ÇEVRE
YİYECEK & İÇECEK
TERS MÜHENDİSLİK
BİLİMLER
SPOR
TEKNOLOJİ
GİYİLEBİLİR ÜRÜNLER
Newmarket Head Collar: Stable Halter With Squared Stays, Noseband, Cheeks and Throat Lash (Hasluck, Saddlery, 1904)
Tex

Oluşturan

Tex

13. Kasım 2026FO
4
0
0
0
0

Newmarket Head Collar: Stable Halter With Squared Stays, Noseband, Cheeks and Throat Lash (Hasluck, Saddlery, 1904)

A head collar, also called a headstall or stable collar, ties a horse up in the stable. This is the Newmarket pattern from Paul N. Hasluck's Saddlery (1904): two short stays carrying three stop squares, a noseband, two cheeks, an upward stay, a forehead band, a top strap and a throat lash. Every size is his. It has no bit; the rein is fastened to the centre square.
Orta
About 1 day

Talimatlar

1

Cutting list

Jupyter defteri yükleniyor…
2

Read Saddlery, ch. VIII

"Head collars, also called headstalls and stable collars, are made in various ways, and one of the most useful styles will be described in this chapter."
3

Make the short stays

Cut two short straps 1 ft by 1-1/4 in and turn them in to 5 in long, leaving 1 in or a little more for overlap. Shave the ends and prick them eight to the inch. Put one square in the centre between them and one in each end, with the stops on the same side. Lay a strip of leather along the centre of each to raise the stay, then stitch with beeswaxed three-cord hemp thread, with a strong cross-stitch at the end of each line.

Bu adım için malzemeler:

Koşum derisiKoşum derisi1 adet
Yular kare halkasıYular kare halkası3 adet
Kenevir İpiKenevir İpi1 adet
BalmumuBalmumu1 adet

Gerekli aletler:

Deri bıçağıDeri bıçağı
Deri dikiş zımbasıDeri dikiş zımbası
BizBiz
İki saraç iğnesiİki saraç iğnesi
Saraç mengenesiSaraç mengenesi
Şerit MetreŞerit Metre
4

Make the noseband

Cut the noseband 1 ft 3 in long when turned down. Prepare it and put one end, forming a chape, in each of the end squares of the short stays. Stitch two rows along the edges of the turn-down and trim the ends neatly.

Bu adım için malzemeler:

Koşum derisiKoşum derisi1 adet
Kenevir İpiKenevir İpi1 adet
BalmumuBalmumu1 adet

Gerekli aletler:

Deri bıçağıDeri bıçağı
Deri dikiş zımbasıDeri dikiş zımbası
BizBiz
İki saraç iğnesiİki saraç iğnesi
5

Make the cheeks

Cut a pair of cheeks 1-1/4 in by 8 in when bent in both ends. Prepare one end of each for a buckle and shave the points of the other turn-down. Put a runner on each cheek and a loop and the 1-1/4 in roller buckle on one end, then stitch the opposite ends to the two outer squares.

Bu adım için malzemeler:

Koşum derisiKoşum derisi1 adet
Makaralı tokaMakaralı toka1 adet
Kenevir İpiKenevir İpi1 adet
BalmumuBalmumu1 adet

Gerekli aletler:

Deri bıçağıDeri bıçağı
BizBiz
İki saraç iğnesiİki saraç iğnesi
Köprü kalıp çubuğuKöprü kalıp çubuğu
6

Make the upward stay

Cut the short upward stay and stitch it behind in the centre square. Its length when doubled is about 4-1/2 in, with an opening left at the top for the throat lash to run through.

Bu adım için malzemeler:

Koşum derisiKoşum derisi1 adet
Kenevir İpiKenevir İpi1 adet
BalmumuBalmumu1 adet

Gerekli aletler:

Deri bıçağıDeri bıçağı
BizBiz
İki saraç iğnesiİki saraç iğnesi
7

Make the forehead band, top strap and throat lash

Make the forehead band like the snaffle bridle front. Cut the top strap 2 ft by 1-1/4 in and, when finished, punch about four holes on both sides. Make the throat lash 3 ft 6 in by 3/4 in, with the 3/4 in roller buckle, a loop and a runner, and about nine holes.

Bu adım için malzemeler:

Koşum derisiKoşum derisi1 adet
Makaralı tokaMakaralı toka1 adet
Kenevir İpiKenevir İpi1 adet
BalmumuBalmumu1 adet

Gerekli aletler:

Deri bıçağıDeri bıçağı
Deri delme zımbasıDeri delme zımbası
BizBiz
İki saraç iğnesiİki saraç iğnesi
Köprü kalıp çubuğuKöprü kalıp çubuğu
8

Put it together

Put the forehead band on the head strap and buckle it on both sides in the cheeks. Run the throat lash from the near side through the opening in the upward stay and under the head strap, then through the opening in the forehead band on each side, and bring the point down to the buckle on the near side. If the collar has only one cheek, on the near side, make the strap on the other side 2 ft 9 in long.
9

Troubleshooting

Head collar troubleshooting.

Flow

Loading...
10

History and honest limits

From **Saddlery**, edited by Paul N. Hasluck, David McKay, 1904 (archive.org saddlery00hasl), chapter VIII, "Head Collars", the Newmarket head collar, Fig. 23; every fraction was read on the scan. His list names one 1-1/4 in roller buckle and one 3/4 in buckle; the throat lash takes a roller buckle of its own width, and fitting the larger one to the cheek is our reading. Not made here: the Albert and Queen's pattern collars and the head collar reins. The metric figures are ours.

Malzemeler

5

Gerekli Aletler

8

CC0 Kamu Malı

Bu plan CC0 lisansıyla yayınlanmıştır. İzin almadan kopyalayabilir, değiştirebilir, dağıtabilir ve herhangi bir amaçla kullanabilirsiniz.

Planı üzerinden ürün satın alarak Maker'ı destekleyin, böylece Maker Komisyonu Satıcılar tarafından belirlenen komisyonu kazanırlar veya bu Planın yeni bir versiyonunu oluşturun ve gelir paylaşımı için kendi Planınıza bağlantı olarak ekleyin.

Tartışma

(0)

Giriş yapın tartışmaya katılmak için

Yorumlar yükleniyor...