İşbirliği
SANAT
GÜZELLİK & SAĞLIK
ZANAAT
KÜLTÜR & TARİH
EĞLENCE
ÇEVRE
YİYECEK & İÇECEK
TERS MÜHENDİSLİK
BİLİMLER
SPOR
TEKNOLOJİ
GİYİLEBİLİR ÜRÜNLER

Homemade Hacksaw Frame Cut from Hard Wood (Boy Mechanic, 1915)
A hacksaw frame sawn from one piece of hard wood: the blade is bolted into a slot at the handle end and tensioned at the far end by a bolt with a bent sheet-metal head whose tongue sits in a saw cut so the blade cannot twist.
Başlangıç
Two hours
Talimatlar
1
1
Read the Boy Mechanic
Read the Boy Mechanic
"The frame is made of hard wood. The saw end is inserted in a slot sawed in the handle end, and a screw or small bolt holds it in place."
2
2
Cut the frame
Cut the frame
Saw the frame from one piece of hard wood as in the figure: a long back with a handle end (with a hand-hole) and a short far end, open between them for the blade.
Bu adım için malzemeler:
Sert Ağaç Tahtası1 adetGerekli aletler:
El Testeresi
Kıl Testere
Kol matkabı ve ucu
Eğeler (El Eğesi)3
3
Fix the handle end
Fix the handle end
Saw a slot in the handle end, slip one end of the blade in, and hold it with a screw or small bolt through the blade's hole.
Bu adım için malzemeler:
Demir testeresi lamı1 adet
Kare boyunlu yuvarlak başlı cıvata1 adetGerekli aletler:
El Testeresi
El matkabı4
4
Make the tension bolt
Make the tension bolt
Bend a sheet-metal head onto a bolt (A in the figure) and fix the blade's other end to it. Pass the bolt through the far end of the frame and tighten its nut to draw the blade taut. A projection of the sheet metal fits a saw cut in the frame so the blade cannot turn.
Bu adım için malzemeler:
Teneke sac1 adet
Kare boyunlu yuvarlak başlı cıvata1 adet
Kanatlı somun1 adetGerekli aletler:
Sac makası
Yassı Ağızlı Pense
El matkabı
El Testeresi5
5
Troubleshooting
Troubleshooting
Wooden hacksaw troubleshooting.
Flow
Loading...
6
6
History and honest limits
History and honest limits
From **The Boy Mechanic, Book 2** (Popular Mechanics, 1915), p. 426, by W. A. Henry (checked on the archive.org scan boymechanicbook200chic2). No sizes are given; the wing nut and tools are ours.
Malzemeler
5- 1 adetYer Tutucu
- 1 adetYer Tutucu
- Yer Tutucu
- 1 adetYer Tutucu
- 1 adetYer Tutucu
Gerekli Aletler
7- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
Bu planla yapılan
İlgili Blueprint'ler
Bu blueprint'ler bilgi paylaşır — teknikler, malzemeler veya ilkeler
CC0 Kamu Malı
Bu plan CC0 lisansıyla yayınlanmıştır. İzin almadan kopyalayabilir, değiştirebilir, dağıtabilir ve herhangi bir amaçla kullanabilirsiniz.
Planı üzerinden ürün satın alarak Maker'ı destekleyin, böylece Maker Komisyonu Satıcılar tarafından belirlenen komisyonu kazanırlar veya bu Planın yeni bir versiyonunu oluşturun ve gelir paylaşımı için kendi Planınıza bağlantı olarak ekleyin.

