SANAT
GÜZELLİK & SAĞLIK
ZANAAT
KÜLTÜR & TARİH
EĞLENCE
ÇEVRE
YİYECEK & İÇECEK
TERS MÜHENDİSLİK
BİLİMLER
SPOR
TEKNOLOJİ
GİYİLEBİLİR ÜRÜNLER
Horseshoe Nails Forged and Headed from Iron Rod
Forge

Oluşturan

Forge

14. Ekim 2026NO
18
0
0
0
0

Horseshoe Nails Forged and Headed from Iron Rod

Horseshoe nails hold the shoe through the hard outer wall of the hoof. They are shaped to bend outward as they are driven, so the point comes out through the wall, where it is cut off and clinched over. A shoe complete with its nails was found in a fifth-century grave. Draw a flat tapering shank, bevel the point on one side, and head it. The picture: horseshoe nails in three sizes.
Orta
Half a day

Talimatlar

1

Draw the shank

Heat the end of the rod and draw a flat, tapering shank about 45 mm long, thinner toward the point.

Bu adım için malzemeler:

Dövme demir milDövme demir mil2 m

Gerekli aletler:

Demirci ocağıDemirci ocağı
ÖrsÖrs
Enine keski başlı çekiçEnine keski başlı çekiç
Demirci kerpeteniDemirci kerpeteni
Kaynak eldivenleriKaynak eldivenleri
Koruyucu gözlükKoruyucu gözlük
2

Bevel the point

Forge a short bevel on one face of the point only. Mark that face: it goes toward the inside of the hoof, so the nail turns outward.

Gerekli aletler:

ÖrsÖrs
Enine keski başlı çekiçEnine keski başlı çekiç
Demirci kerpeteniDemirci kerpeteni
Kaynak eldivenleriKaynak eldivenleri
Koruyucu gözlükKoruyucu gözlük
3

Cut and head

Nick the rod on the hardy a little above the shank, drop the shank into the header, snap it off and hammer the stub into a tapered, wedge-shaped head that will sit in the nail hole of the shoe.

Gerekli aletler:

Demirci ocağıDemirci ocağı
Örs kesme keskisiÖrs kesme keskisi
Çivi başlığı kalıbıÇivi başlığı kalıbı
Enine keski başlı çekiçEnine keski başlı çekiç
Demirci kerpeteniDemirci kerpeteni
Kaynak eldivenleriKaynak eldivenleri
Koruyucu gözlükKoruyucu gözlük
4

Finish

Let them cool in air so the iron stays soft enough to clinch. File off any burr and check each one is straight.

Gerekli aletler:

Metal EğeMetal Eğe
5

Nails for a set

Jupyter defteri yükleniyor…

Malzemeler

1

Gerekli Aletler

9

CC0 Kamu Malı

Bu plan CC0 lisansıyla yayınlanmıştır. İzin almadan kopyalayabilir, değiştirebilir, dağıtabilir ve herhangi bir amaçla kullanabilirsiniz.

Planı üzerinden ürün satın alarak Maker'ı destekleyin, böylece Maker Komisyonu Satıcılar tarafından belirlenen komisyonu kazanırlar veya bu Planın yeni bir versiyonunu oluşturun ve gelir paylaşımı için kendi Planınıza bağlantı olarak ekleyin.

Tartışma

(0)

Giriş yapın tartışmaya katılmak için

Yorumlar yükleniyor...