İşbirliği
SANAT
GÜZELLİK & SAĞLIK
ZANAAT
KÜLTÜR & TARİH
EĞLENCE
ÇEVRE
YİYECEK & İÇECEK
TERS MÜHENDİSLİK
BİLİMLER
SPOR
TEKNOLOJİ
GİYİLEBİLİR ÜRÜNLER

Iron Retort: a Mercury Flask with an Iron Tube Screwed In (Morfit, 1849)
A small iron retort for distilling dry substances that need a high heat. Campbell Morfit (1849) says all iron retorts should be of cast metal, but gives a simpler and cheaper one: an empty mercury flask with an iron gas tube or gun barrel screwed into the top, reaching nearly to the bottom, and another tube bent downwards (his Fig. 205).
The retort is heated in a furnace. Flask size, tube sizes and how the side tube is joined are not given.
Source: C. Morfit, Chemical and Pharmaceutic Manipulations (1849), pp. 241-242. Picture: Fig. 205.
Başlangıç
Unknown
Talimatlar
1
1
Read Morfit
Read Morfit
"A simpler and more economical apparatus is a mercury flask, Fig. 205, with an iron gas tube or gun barrel screwed into the top, and reaching nearly to the bottom, and another tube bent downwards. This arrangement, well fitted for distilling dry substances which require a high heat, may be modified by removing the centre pipe and inserting a screw plug, and thus be made well adapted to the distillation of mercury."
2
2
Screw in the centre tube
Screw in the centre tube
Take an empty mercury flask. Screw an iron tube into the top so that it reaches nearly to the bottom of the flask (Fig. 205). Ours: thick-walled steel pipe with threaded ends stands for the iron gas tube. Its bore and length are not given.
Bu adım için malzemeler:
Cıva şişesi1 adet
Çelik boru (kalın cidarlı, dişli uçlu)1 centre tubeGerekli aletler:
Boru anahtarı3
3
Fit the bent side tube
Fit the bent side tube
Fit a second tube at the top of the flask, bent so it leads away to the receiver (Fig. 205). Morfit does not say how this tube is joined to the flask or how it is bent (unknown).
Bu adım için malzemeler:
Çelik boru (kalın cidarlı, dişli uçlu)1 side tube
Bilinmeyen konnektör1 adetGerekli aletler:
Tezgah Mengenesi
Boru anahtarı4
4
History and honest limits
History and honest limits
Faraday (Chemical Manipulation, 1830) describes small iron retorts as bottles with an iron tube fitted by a ground joint, used mostly for distilling oxygen, and heated best by a coal or coke fire. Morfit heats all iron retorts in furnaces, greases them when not in use against rust, and keeps them stoppered. For mercury he takes out the centre pipe and puts in a screw plug.
Not given: flask size, tube bore and length, how the side tube is joined and bent.
Malzemeler
3- 1 adetYer Tutucu
- 1 side tubeYer Tutucu
- 1 adetYer Tutucu
Gerekli Aletler
2- Yer Tutucu
- Yer Tutucu
Bu planla yapılan
CC0 Kamu Malı
Bu plan CC0 lisansıyla yayınlanmıştır. İzin almadan kopyalayabilir, değiştirebilir, dağıtabilir ve herhangi bir amaçla kullanabilirsiniz.
Planı üzerinden ürün satın alarak Maker'ı destekleyin, böylece Maker Komisyonu Satıcılar tarafından belirlenen komisyonu kazanırlar veya bu Planın yeni bir versiyonunu oluşturun ve gelir paylaşımı için kendi Planınıza bağlantı olarak ekleyin.
