İşbirliği
SANAT
GÜZELLİK & SAĞLIK
ZANAAT
KÜLTÜR & TARİH
EĞLENCE
ÇEVRE
YİYECEK & İÇECEK
TERS MÜHENDİSLİK
BİLİMLER
SPOR
TEKNOLOJİ
GİYİLEBİLİR ÜRÜNLER

Lathe Dog: Cut from Iron Pipe with Setscrews (Boy Mechanic, 1915)
A cheap lathe dog for turning work between centres: a short piece of iron pipe clamped on the work by setscrews, with a 1 in tongue left standing that the faceplate drives.
Source: The Boy Mechanic, Book 2 (1915), p. 319. Picture: the book's sketch of both forms.
Başlangıç
Unknown
Talimatlar
1
1
Cut the pipe
Cut the pipe
Cut a section of iron pipe 1 1/2 to 3 in long, big enough to slip over the work. Cut part of it away, leaving a projecting tongue of metal 1 in wide for the faceplate to drive (sketch, left).
Bu adım için malzemeler:
Çelik boru (kalın cidarlı, dişli uçlu)1 1 1/2 to 3 inGerekli aletler:
Demir Testeresi Gövdesi ve Ağızları
Metal Eğe2
2
Fit the setscrews
Fit the setscrews
Drill and tap the round part for one or more setscrews and screw them in; they grip the work.
Bu adım için malzemeler:
Çukur uçlu setuskur1 one or moreGerekli aletler:
El matkabı
Kılavuz ve pafta takımıMalzemeler
2- 1 1 1/2 to 3 inYer Tutucu
- 1 one or moreYer Tutucu
Gerekli Aletler
4- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
Bu planla yapılan
CC0 Kamu Malı
Bu plan CC0 lisansıyla yayınlanmıştır. İzin almadan kopyalayabilir, değiştirebilir, dağıtabilir ve herhangi bir amaçla kullanabilirsiniz.
Planı üzerinden ürün satın alarak Maker'ı destekleyin, böylece Maker Komisyonu Satıcılar tarafından belirlenen komisyonu kazanırlar veya bu Planın yeni bir versiyonunu oluşturun ve gelir paylaşımı için kendi Planınıza bağlantı olarak ekleyin.
