SANAT
GÜZELLİK & SAĞLIK
ZANAAT
KÜLTÜR & TARİH
EĞLENCE
ÇEVRE
YİYECEK & İÇECEK
TERS MÜHENDİSLİK
BİLİMLER
SPOR
TEKNOLOJİ
GİYİLEBİLİR ÜRÜNLER

Magnesium Ribbon: Rolled Hot at 450 °C and Slit
Magnesium ribbon catches in a flame and burns with an intense white light, which makes it the lighter for a thermit charge. Thorpe (1912): magnesium is malleable but ductile only when hot, it can be rolled at 450 °C, and it is most used flattened into ribbon. It tarnishes in moist air, so store it dry. Keep flame away from the finished ribbon.
The picture: magnesium ribbon burning (Wikimedia Commons).
Orta
Half a day
Talimatlar
1
1
Cut a piece
Cut a piece
Saw a 20 g piece off the magnesium ingot.
Bu adım için malzemeler:
Magnezyum Külçe20 gGerekli aletler:
Demir Testeresi
Eşit kollu terazi2
2
Heat to 450 °C
Heat to 450 °C
Heat the piece to 450 °C in the furnace and check it with the pyrometer. Cold, magnesium is not ductile.
Gerekli aletler:
Odun Kömürü Fırını
Pirometre
Maşa
Deri Eldiven3
3
Roll it thin
Roll it thin
Pass it through the rolling mill, close the rolls a little each time, and reheat to 450 °C between passes. Stop at about 0.2 mm thick.
Gerekli aletler:
Hadde
Odun Kömürü Fırını
Maşa
Mikrometre
Deri Eldiven4
4
Slit and store
Slit and store
Cut the cold strip into ribbon about 3 mm wide, coil it, and keep it in a dry, closed jar.
Gerekli aletler:
Metal makası
Kapaklı Cam KavanozlarMalzemeler
1- 20 gYer Tutucu
Bu planla yapılan
CC0 Kamu Malı
Bu plan CC0 lisansıyla yayınlanmıştır. İzin almadan kopyalayabilir, değiştirebilir, dağıtabilir ve herhangi bir amaçla kullanabilirsiniz.
Planı üzerinden ürün satın alarak Maker'ı destekleyin, böylece Maker Komisyonu Satıcılar tarafından belirlenen komisyonu kazanırlar veya bu Planın yeni bir versiyonunu oluşturun ve gelir paylaşımı için kendi Planınıza bağlantı olarak ekleyin.
