İşbirliği
SANAT
GÜZELLİK & SAĞLIK
ZANAAT
KÜLTÜR & TARİH
EĞLENCE
ÇEVRE
YİYECEK & İÇECEK
TERS MÜHENDİSLİK
BİLİMLER
SPOR
TEKNOLOJİ
GİYİLEBİLİR ÜRÜNLER

Northwest Coast Splitting Wedge: Spruce or Cedar Body, Head Bound with a Twisted Spruce-Root Grommet (Niblack, 1890)
The wooden wedge used all along the Northwest Coast to split logs into boards, as Albert Niblack recorded it (the specimen is Makah, from Cape Flattery): a tapered body of spruce or cedar, its striking head bound with a grommet of twisted spruce root or tough withes so the stone sledge does not split it.
Başlangıç
An hour or two
Talimatlar
1
1
Read Niblack
Read Niblack
"The heads of the wedges are protected, or prevented from splitting, by a grommet woven from tough withes or from spruce root."
2
2
Shape the body
Shape the body
Split out a piece of spruce or cedar and shave it to a long wedge, thick at the head and thin at the edge (ours: about 30 cm long and 5 cm across the head; Fig. 84 is long and slender).
Bu adım için malzemeler:
Ladin tomruğu (Picea abies)1 adetGerekli aletler:
Balta
İki Saplı Yontma Bıçağı
Bıçak3
3
Bind the head
Bind the head
Twist split spruce root (or tough withes) into a tight ring and work it down over the head so it hugs the wood, as in Fig. 84. Ours: put it on damp so it shrinks tight as it dries.
Bu adım için malzemeler:
Yarılmış ağaç kökleri1 adet
Söğüt çubuğu1 adetGerekli aletler:
Bıçak4
4
Use it
Use it
Drive several wedges along a crack with a heavy sledge (theirs had basalt heads lashed to wooden hafts) to split logs into boards and get out timber.
Gerekli aletler:
Ahşap Tokmak5
5
Troubleshooting
Troubleshooting
Wedge troubleshooting.
Flow
Loading...
6
6
History and honest limits
History and honest limits
From Albert P. Niblack, *The Coast Indians of Southern Alaska and Northern British Columbia*, **Report of the U.S. National Museum for 1888** (1890), pp. 281-282 and Plate XXII, Fig. 84 (checked on the archive.org scan coastindiansofso00nibl). Iron wedges were coming in by then. Size, taper and how the grommet is woven are ours.
Malzemeler
3- Yer Tutucu
- 1 adetYer Tutucu
- 1 adetYer Tutucu
Bu planla yapılan
İlgili Blueprint'ler
Bu blueprint'ler bilgi paylaşır — teknikler, malzemeler veya ilkeler

Totem Pole of the Haida, Tlingit and Tsimshian: Cedar Log Adzed, Relief-Carved with Crests, Painted and Raised on Guys (Niblack, 1890)
Woody tarafından
Ağaç işleri
7
0
0
0
0
0

Thompson (Nlaka'pamux) Split Cedar Roots: Finger-Thick Roots Dug, Buried Fresh, Peeled, Dried and Split with a Bone Awl (Teit, 1900)
Tex tarafından
Tekstil ve Deri
6
0
0
0
0
0
CC0 Kamu Malı
Bu plan CC0 lisansıyla yayınlanmıştır. İzin almadan kopyalayabilir, değiştirebilir, dağıtabilir ve herhangi bir amaçla kullanabilirsiniz.
Planı üzerinden ürün satın alarak Maker'ı destekleyin, böylece Maker Komisyonu Satıcılar tarafından belirlenen komisyonu kazanırlar veya bu Planın yeni bir versiyonunu oluşturun ve gelir paylaşımı için kendi Planınıza bağlantı olarak ekleyin.
