SANAT
GÜZELLİK & SAĞLIK
ZANAAT
KÜLTÜR & TARİH
EĞLENCE
ÇEVRE
YİYECEK & İÇECEK
TERS MÜHENDİSLİK
BİLİMLER
SPOR
TEKNOLOJİ
GİYİLEBİLİR ÜRÜNLER
Orbiting Churn With Rod Rack: The Churn Circles Without Turning, Rods Break the Current
Maxwell moved the whole churn, but not round its own axis.
Rufus Maxwell of Lewis County, Virginia, received US 9,218, dated 24 August 1852, for a churn fastened in a frame hung by a hook and staple inside a supporting frame, with a crank connecting the two "so that the center of the bottom of the churn may revolve about a circle, (five or six inches in diameter)." This makes the milk flow round; a rack of parallel rods half an inch apart on a bow of "tough elastic wood" pressing against the sides breaks the current. He claimed forcing the milk through a rack "by revolving the churn in an orbit, without turning it on axis."
This rung works out the bottom's speed, then prints the rod holders and orbit crank, builds the frame and rack, and makes butter.
Orta
About 4 hours, plus printing
Talimatlar
1
1
The orbit
The orbit
Jupyter defteri yükleniyor…
2
2
A churn that moves as a whole, with a grate inside, before it
A churn that moves as a whole, with a grate inside, before it
The embedded blueprint rocks a barrel through a grate. Maxwell circles his churn so the milk flows round through a rack of rods.
3
3
Read US 9,218
Read US 9,218
"This rack consists of a piece of tough elastic wood, bent as represented at Fig. 2, so that it will press against the sides of the churn, thus holding the rack in a stationary position, (with respect to the churn)."
4
4
Print the parts
Print the parts
Print four rod holders (/uploads/blueprints/orbiting-churn-with-rod-rack-rod-holder.stl), the blocks n, and the orbit crank (/uploads/blueprints/orbiting-churn-with-rod-rack-orbit-crank.stl), whose pin is 70 mm off centre for a 5½ in circle. Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.
Bu adım için malzemeler:
PETG filament1 adetGerekli aletler:
FDM 3B yazıcı5
5
The rack
The rack
Bend a strip of thin steam-bent hardwood or spring steel into a U that springs against the inside of a tapered food-grade bucket. Screw the rod holders to its two legs and push 6 mm hardwood dowels through them, 12–13 mm apart as his, across the bucket.
Bu adım için malzemeler:
Yay çeliği şeridi1 adet
Sert ağaç kavelalar1 adet
#8 x 1" ahşap vidası1 adet
20 Litrelik Kova1 adetGerekli aletler:
El Testeresi
Kablosuz Matkap
Tornavida takımı6
6
Frames and crank
Frames and crank
Fasten the bucket in a pine frame and hang that frame from a hook in a larger supporting frame. Mount the orbit crank on a post under the bucket so its pin sits in a socket at the centre of the bucket's bottom, and run the hanging frame's top up through a guide as the handle. Turning the crank carries the bottom round without turning the bucket.
Bu adım için malzemeler:
Çam tahta1 adet
Yumuşak Çelik Çubuk1 adet#8 x 1" ahşap vidası1 adetSert ağaç kavelalar1 adetGerekli aletler:
El TesteresiKablosuz Matkap
Matkap Ucu TakımıTornavida takımı7
7
The patent drawing
The patent drawing
US 9,218 drawing sheet, public domain (expired patent).
8
8
Orbit and make butter
Orbit and make butter
Let the heavy cream stand until it reaches about 15 °C, checked with the thermometer. Pour in 3 litres. Turn the crank so the bottom circles steadily; time until the butter comes. Pour off the buttermilk, add cold water, churn a little and pour off again until it runs clear; work in a pinch of salt and weigh the butter.
Bu adım için malzemeler:
Yağlı krema3000 ml
İri Deniz Tuzu1 adet
Su1 adetGerekli aletler:
Takılı kalan problu termometre
Kronometre
Dijital Mutfak Terazisi
Büyük paslanmaz çelik karıştırma kâsesi9
9
A rack that slips, a churn that turns
A rack that slips, a churn that turns
Orbiting churn troubleshooting.
Flow
Loading...
10
10
History and honest limits
History and honest limits
**Rufus Maxwell** of Lewis County, Virginia (the drawing reads Weston), received US 9,218, dated 24 August 1852. Four pins in the bow at n, n carry the rods, bored through them. He claimed forcing the milk through a rack by revolving the churn in an orbit without turning it on its axis, and the bow and rods connected together.
**Honest limits.** A bucket, pine frames and printed parts stand in for his. FDM prints hold food in their layer lines, so wash well and replace when worn. Your times and weights are the result.
Malzemeler
10- 1 adetYer Tutucu
- 1 adetYer Tutucu
- 1 adetYer Tutucu
- 2 adetYer Tutucu
- 1 adetYer Tutucu
- 1 adetYer Tutucu
- 1 adetYer Tutucu
- 3000 mlYer Tutucu
- 1 adetYer Tutucu
- 1 adetYer Tutucu
Gerekli Aletler
9- Yer Tutucu
- Yer Tutucu
- 1 vendor sell this, none ship to you yetYer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
İlgili Blueprint'ler
Bu blueprint'ler bilgi paylaşır — teknikler, malzemeler veya ilkeler
Rocking Two-Section Barrel Churn: Cream Falls Through a Grate as the Barrel Tips End Over End
Karen tarafından
YİYECEK & İÇECEK
9
0
0
0
0
0
Rotary Stirring Churn: Three Floats That Stop the Cream Merely Going Round
YourGrandma tarafından
YİYECEK & İÇECEK
8
0
0
0
0
0
Churning Butter from Cream — The 5,000-Year-Old Fat Separation
TheChef tarafından
ZANAAT
47
0
0
0
0
0
CC0 Kamu Malı
Bu plan CC0 lisansıyla yayınlanmıştır. İzin almadan kopyalayabilir, değiştirebilir, dağıtabilir ve herhangi bir amaçla kullanabilirsiniz.
Planı üzerinden ürün satın alarak Maker'ı destekleyin, böylece Maker Komisyonu Satıcılar tarafından belirlenen komisyonu kazanırlar veya bu Planın yeni bir versiyonunu oluşturun ve gelir paylaşımı için kendi Planınıza bağlantı olarak ekleyin.