SANAT
GÜZELLİK & SAĞLIK
ZANAAT
KÜLTÜR & TARİH
EĞLENCE
ÇEVRE
YİYECEK & İÇECEK
TERS MÜHENDİSLİK
BİLİMLER
SPOR
TEKNOLOJİ
GİYİLEBİLİR ÜRÜNLER
Piston-Pump Egg Beater: Pump the Eggs Through a Grate
J. J. Parker, Marietta, Ohio · Public domain (expired patent)
YourGrandma

Oluşturan

YourGrandma

6. Ekim 2026IS
13
0
0
0
0

Piston-Pump Egg Beater: Pump the Eggs Through a Grate

A whisk stirs the eggs; it does not force them through anything. J. J. Parker of Marietta, Ohio, received US 25,038, dated 9 August 1859, for an egg beater and churn combined: a tin tube with square openings at its lower end and a piston inside, worked up and down "in the manner of a pump" by a crank, which "draws the eggs in and out through the grate bars until they are completely torn in pieces or made perfectly fine and frothy"; a band turned round the tube's foot closes the openings to vary the agitation. This rung works out the jet speed at each band setting, then prints the tube, band and piston, fits the crank, and times a beating at two settings.
Orta
About 3 hours, plus printing

Talimatlar

1

Jet speed at each setting

Jupyter defteri yükleniyor…
2

The churning it also does

The embedded blueprint churns cream to butter. Parker's pump-tube does the same when worked longer in cream.
3

Read US 25,038

"At the lower end of the tube is a band of about one half an inch in width loosely fitted with openings one fourth of an inch square and corresponding exactly with the openings in the tube and of the same size, so that by turning the band around either way the openings are closed or made smaller at pleasure, so as to produce more or less agitation in the eggs or cream. This band has a bottom with grate like bars cut or made in it."
4

Print the tube, band and piston

Print the tube (/uploads/blueprints/piston-pump-egg-beater-tube.stl), the band with its grate (/uploads/blueprints/piston-pump-egg-beater-band.stl) and the piston disk (/uploads/blueprints/piston-pump-egg-beater-piston.stl). Print in PETG at 0.2 mm layers, 30 % infill, 4 walls.

Bu adım için malzemeler:

PETG filamentPETG filament1 adet

Gerekli aletler:

FDM 3B yazıcıFDM 3B yazıcı
5

Pack the piston

Cut a leather disk 2 mm larger than the piston. Clamp it between the printed disk and a washer on an M3 rod end with a nut, so its edge seals the tube.

Bu adım için malzemeler:

DeriDeri1 adet
Düz PulDüz Pul1 adet
Altıgen SomunAltıgen Somun1 adet
Makine vidalarıMakine vidaları1 adet

Gerekli aletler:

Maket BıçağıMaket Bıçağı
Kurbağacık anahtarKurbağacık anahtar
Dijital Kumpas 6 İnçDijital Kumpas 6 İnç
6

Post and crank

Epoxy a 4 mm wire post up the tube's side, bent at its top into bearings 100 mm above the tube. Bend a crank shaft of 3 mm wire with a 22 mm crank one end and a handle the other, and link the crank to the rod with a wire pitman.

Bu adım için malzemeler:

Yumuşak Çelik ÇubukYumuşak Çelik Çubuk1 adet
Paslanmaz çelik telPaslanmaz çelik tel1 adet
İki bileşenli epoksiİki bileşenli epoksi1 adet

Gerekli aletler:

Tezgah MengenesiTezgah Mengenesi
Yuvarlak uçlu penseYuvarlak uçlu pense
Yassı Ağızlı PenseYassı Ağızlı Pense
Demir TesteresiDemir Testeresi
Şeffaf Koruyucu GözlükŞeffaf Koruyucu Gözlük
7

The patent drawing

US 25,038 drawing sheet, public domain (expired patent).
Adım 7 - Image 1
8

Beat at two settings

Stand the beater in a bowl with two eggs and a spoon of sugar. Crank twice a second with the band fully open and time to a fine froth; repeat with the band half closed.
Adım 8 - Image 1

Bu adım için malzemeler:

YumurtaYumurta4 adet
Toz şekerToz şeker1 adet

Gerekli aletler:

Büyük paslanmaz çelik karıştırma kâsesiBüyük paslanmaz çelik karıştırma kâsesi
KronometreKronometre
9

A pump that leaks past, sticks or splashes

Piston-pump egg beater troubleshooting.

Flow

Loading...
10

History and honest limits

**J. J. Parker** of Marietta, Ohio, received US 25,038, dated 9 August 1859. His smaller machine's tube is one and a half inches across and one and five eighths deep; the crank shaft is No. 7 wire with a seven-eighths-inch crank; the piston is two oval pieces of thin metal with leather between, its edges forced out by pressing them together. It may also be worked by a handle on the rod instead of a crank. **Honest limits.** FDM prints hold food in their layer lines, so wash well and replace when worn. Printed PETG stands in for tin. The notebook treats the flow as steady. Your times are the result.

Malzemeler

10

Gerekli Aletler

11

İlgili Blueprint'ler

Bu blueprint'ler bilgi paylaşır — teknikler, malzemeler veya ilkeler

Ratchet-Bar Egg Beater: Push a Rack, the Floats Spin Both Ways

Ratchet-Bar Egg Beater: Push a Rack, the Floats Spin Both Ways

YourGrandma tarafındanIS

YİYECEK & İÇECEK

14
0
0
0
0
0
Churning Butter from Cream — The 5,000-Year-Old Fat Separation

Churning Butter from Cream — The 5,000-Year-Old Fat Separation

TheChef tarafındanDK

ZANAAT

47
0
0
0
0
0
Rack and Pinion

Rack and Pinion

Emma tarafındanSE

ZANAAT

43
0
0
0
0
0

CC0 Kamu Malı

Bu plan CC0 lisansıyla yayınlanmıştır. İzin almadan kopyalayabilir, değiştirebilir, dağıtabilir ve herhangi bir amaçla kullanabilirsiniz.

Planı üzerinden ürün satın alarak Maker'ı destekleyin, böylece Maker Komisyonu Satıcılar tarafından belirlenen komisyonu kazanırlar veya bu Planın yeni bir versiyonunu oluşturun ve gelir paylaşımı için kendi Planınıza bağlantı olarak ekleyin.

Tartışma

(0)

Giriş yapın tartışmaya katılmak için

Yorumlar yükleniyor...