İşbirliği
SANAT
GÜZELLİK & SAĞLIK
ZANAAT
KÜLTÜR & TARİH
EĞLENCE
ÇEVRE
YİYECEK & İÇECEK
TERS MÜHENDİSLİK
BİLİMLER
SPOR
TEKNOLOJİ
GİYİLEBİLİR ÜRÜNLER
Platinum Crucible: Shaped from Foil in a Hollow in a Board (Morfit, 1849)
Charlie

Oluşturan

Charlie

7. Kasım 2026DE
7
0
0
0
0

Platinum Crucible: Shaped from Foil in a Hollow in a Board (Morfit, 1849)

A small platinum crucible for igniting precipitates at high heat. Campbell Morfit (1849): "The experimenter himself can in any emergency readily form a crucible out of platinum foil by shaping it with the thumb or a small hammer, in a hemispherical cavity made in a board for the purpose." Platinum crucibles must be of pure metal and hammered, not turned; thin enough to weigh on a delicate balance. Foil thickness and the size of the hollow are not given. Source: C. Morfit, Chemical and Pharmaceutic Manipulations (1849), pp. 196-197. Picture: Fig. 164.
Başlangıç
Unknown

Talimatlar

1

Read Morfit

"The experimenter himself can in any emergency readily form a crucible out of platinum foil by shaping it with the thumb or a small hammer, in a hemispherical cavity made in a board for the purpose."
2

Make the hollow

Cut a hemispherical cavity in a board, the size of the crucible wanted. Morfit's crucibles hold from a fluidrachm to three fluid ounces; a half-ounce one is the most needed in analysis. How the cavity is cut is not given (ours: a gouge in a hardwood board).

Gerekli aletler:

Sert Ağaç TahtasıSert Ağaç Tahtası
Oluklu Kalem (Guj)Oluklu Kalem (Guj)
Bilinmeyen ölçülerBilinmeyen ölçüler
3

Shape the foil

Lay a piece of pure platinum foil over the hollow and press it in with the thumb, or work it in with a small hammer, until it takes the hemispherical shape. The foil thickness, and how the foil is made, are not given (unknown).

Bu adım için malzemeler:

PlatinPlatin1 foil

Gerekli aletler:

Sert Ağaç TahtasıSert Ağaç Tahtası
Küre başlı çekiçKüre başlı çekiç
Bilinmeyen şekillendirme yöntemiBilinmeyen şekillendirme yöntemi
4

Care of the crucible

Blisters and flaws that appear after use come from impure metal and bad workmanship; remove them by the force of a small hammer. Loosen salts with boiling water and rub off stains with sand or pumice stone. Do not use sharp pointed instruments on it.

Gerekli aletler:

Küre başlı çekiçKüre başlı çekiç

Malzemeler

1
  • 1 foil
    Yer Tutucu

Gerekli Aletler

5

Bu planla yapılan

CC0 Kamu Malı

Bu plan CC0 lisansıyla yayınlanmıştır. İzin almadan kopyalayabilir, değiştirebilir, dağıtabilir ve herhangi bir amaçla kullanabilirsiniz.

Planı üzerinden ürün satın alarak Maker'ı destekleyin, böylece Maker Komisyonu Satıcılar tarafından belirlenen komisyonu kazanırlar veya bu Planın yeni bir versiyonunu oluşturun ve gelir paylaşımı için kendi Planınıza bağlantı olarak ekleyin.

Tartışma

(0)

Giriş yapın tartışmaya katılmak için

Yorumlar yükleniyor...