
Weaving a Wicker Fish Trap — Funnel-Entry Basket Trap
Build a funnel-entry fish trap from woven willow withies. Fish swim in through the narrow funnel opening but cannot find their way back out. This passive trap works day and night without tending.
Talimatlar
Gather and Prepare Withies
Gather and Prepare Withies
Harvest green willow withies in spring or early summer when the sap is running — this is when they are most flexible. Select straight rods about 1-1.5 metres long and 3-5mm in diameter. You need 30-40 thin weavers and 8-10 thicker stakes (5-8mm) for the framework. Strip any leaves. If the withies have dried, soak them in water for several hours until pliable.
Build the Cylindrical Body
Build the Cylindrical Body
Arrange 8 thick stakes in a circle, their butt ends together, forming a radiating star pattern. Begin weaving thin withies in and out of the stakes using a simple randing weave — over one stake, under the next, repeating around the circle. After every 3-4 rows, push the weaving down tight. The body should form a cylinder about 30cm in diameter and 50-60cm long. The weave gaps should be small enough that target fish cannot escape through the walls.

Form the Funnel Entrance
Form the Funnel Entrance
At the open end of the cylinder, bend the stake tips inward gradually, weaving them together to form a funnel that narrows to an opening about 5-7cm wide. The funnel should extend 15-20cm into the trap body. Fish follow the funnel walls inward easily but the narrow opening and expanding interior confuse their escape instinct — they swim along the trap walls instead of finding the small hole. Secure the funnel tip stakes by weaving their ends into the body wall.
Close the Back End
Close the Back End
Weave the back end of the trap closed by bending the remaining stakes inward and interlocking them in a dome shape. Leave a small removable panel or tie-closed flap so you can retrieve fish without destroying the trap. This can be a simple bundle of withies lashed in place with cordage that you untie to harvest.
Set the Trap
Set the Trap
Place bait inside the trap — fish scraps, crushed berries, or bread work as attractants. Position the trap in shallow water with the funnel entrance facing downstream. Fish moving upstream will naturally enter the funnel. Weight the trap with stones placed on top to prevent it floating away. Check the trap every 12-24 hours. In productive waters, a single trap can yield several fish per day without any active effort.

Malzemeler
- •Willow withies (green, flexible) - 30-40 rods, 1-1.5m long pieceYer Tutucu
- •Thicker willow stakes - 8-10 rods, 5-8mm diameter pieceYer Tutucu
- •Cordage for binding - 2m pieceYer Tutucu
- •Bait (fish scraps, berries) - as needed piece
Gerekli Aletler
- Flint knifeYer Tutucu
CC0 Kamu Malı
Bu plan CC0 lisansıyla yayınlanmıştır. İzin almadan kopyalayabilir, değiştirebilir, dağıtabilir ve herhangi bir amaçla kullanabilirsiniz.
Planı üzerinden ürün satın alarak Maker'ı destekleyin, böylece Maker Komisyonu Satıcılar tarafından belirlenen komisyonu kazanırlar veya bu Planın yeni bir versiyonunu oluşturun ve gelir paylaşımı için kendi Planınıza bağlantı olarak ekleyin.