İşbirliği
SANAT
GÜZELLİK & SAĞLIK
ZANAAT
KÜLTÜR & TARİH
EĞLENCE
ÇEVRE
YİYECEK & İÇECEK
TERS MÜHENDİSLİK
BİLİMLER
SPOR
TEKNOLOJİ
GİYİLEBİLİR ÜRÜNLER

Quick-Acting Hardwood Bench Vise with Cam and Drop Roll (Boy Mechanic, 1919)
A home-made bench vise entirely of hard wood: the front jaw slides in and out on arm C, a loose roll A drops into place to lock it, a cam lever in front gives the final squeeze, and the pivoted jaw B tilts to grip work whose sides are not parallel.
Orta
A day
Talimatlar
1
1
Sizes in mm
Sizes in mm
Jupyter defteri yükleniyor…
2
2
Read the Boy Mechanic
Read the Boy Mechanic
"A detail is given of each part, with dimensions, so that it is not difficult to make it from hard wood."
3
3
Cut the parts to the drawing
Cut the parts to the drawing
Cut every part from hard wood to the sizes in the drawing: the 6-1/2 x 7-3/8 x 3/4 in plate with its 2-5/16 x 2-7/16 in opening, the 6-1/2 x 4 x 1 in slotted plate, the 5 x 5-1/2 x 1/2 in plate, the blocks, the forked piece, the long bar drawn at the bottom (2 x 1-3/8 in; we take it to be arm C) and the cam lever (5-1/2 in between centres, 5/16 in pin hole; its edge view is drawn 5/8 in).
Bu adım için malzemeler:
Sert Ağaç Tahtası1 adetGerekli aletler:
El Testeresi
Kıl Testere
Marangoz keskileri
Kol matkabı ve ucu4
4
Turn roll A
Turn roll A
Make roll A, a round hardwood roll 1-1/16 in across and 1-7/8 in long.
Bu adım için malzemeler:
Sert ağaç kavelalar1 adetGerekli aletler:
El Testeresi5
5
Assemble under the bench
Assemble under the bench
Fit the parts under the bench top as the section view shows: arm C slides through the fixed part, roll A sits in its curved seat behind the jaw so it can drop and wedge the arm, jaw B is pivoted so it swings loose, and the cam lever is pinned at the front. Screw and bolt the fixed parts to the bench.
Bu adım için malzemeler:
Ahşap vidalar1 adet
Kare boyunlu yuvarlak başlı cıvata1 adetGerekli aletler:
Kol matkabı ve ucu
Çekiç6
6
Use it
Use it
To open: turn the cam, then lift the front of the vise to free roll A, and slide the front jaw out to the size of the work. Put the work in: roll A drops into place and clamps arm C. Turn the cam to tighten.
7
7
Troubleshooting
Troubleshooting
Wooden vise troubleshooting.
Flow
Loading...
8
8
History and honest limits
History and honest limits
From **The Boy Mechanic, Book 3** (Popular Mechanics, 1919), p. 85, by J. C. Hansen (checked on the archive.org scan boymechanic0003unse). The text names only roll A, jaw B, arm C and the cam; build the other pieces as drawn. Metric figures are ours.
Malzemeler
4- 1 adetYer Tutucu
- 1 adetYer Tutucu
- 1 adetYer Tutucu
- Yer Tutucu
Gerekli Aletler
5- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
Bu planla yapılan
İlgili Blueprint'ler
Bu blueprint'ler bilgi paylaşır — teknikler, malzemeler veya ilkeler
CC0 Kamu Malı
Bu plan CC0 lisansıyla yayınlanmıştır. İzin almadan kopyalayabilir, değiştirebilir, dağıtabilir ve herhangi bir amaçla kullanabilirsiniz.
Planı üzerinden ürün satın alarak Maker'ı destekleyin, böylece Maker Komisyonu Satıcılar tarafından belirlenen komisyonu kazanırlar veya bu Planın yeni bir versiyonunu oluşturun ve gelir paylaşımı için kendi Planınıza bağlantı olarak ekleyin.

