İşbirliği
SANAT
GÜZELLİK & SAĞLIK
ZANAAT
KÜLTÜR & TARİH
EĞLENCE
ÇEVRE
YİYECEK & İÇECEK
TERS MÜHENDİSLİK
BİLİMLER
SPOR
TEKNOLOJİ
GİYİLEBİLİR ÜRÜNLER
Self-Healing Cutting Mat: Cork Pinning Side and PVC Cutting Side, Tri-Fold (Carnegie, US 11,077,575)
Emma

Oluşturan

Emma

9. Kasım 2026SE
7
0
0
0
0

Self-Healing Cutting Mat: Cork Pinning Side and PVC Cutting Side, Tri-Fold (Carnegie, US 11,077,575)

A self-healing cutting mat has a PVC face that closes up again after a rotary cutter runs over it. L. V. Carnegie (US 11,077,575, 2021) glues a cork layer to the back of the PVC layer, so the same board takes straight pins on one side and cutting on the other, and scores it so it folds in three for storage. Which PVC heals is not given: Carnegie only says PVC mats are self-healing. Source: L. V. Carnegie, US Patent 11,077,575 (filed 2018, granted 2021). Picture: its Figs. 1 and 3.
Başlangıç
Unknown

Talimatlar

1

Read Carnegie

"Polyvinyl chloride (PVC) mats provide a rigid, self-healing surface on which a rotary cutter may be used ... Fabrics and crafts cannot be pinned directly to PVC mats".
2

Cut the two layers

Cut a PVC sheet and a cork sheet to the same size. Carnegie: each layer 1/8 to 1/2 in. thick (cork 1/4 to 1/2 in.); one mat is 72 in. long by 40 in. wide, but any size will do. The PVC grade that self-heals is not given.

Bu adım için malzemeler:

PVC levhaPVC levha1 cutting layer, self-healing grade not given
Mantar levhaMantar levha1 pinning layer

Gerekli aletler:

Maket bıçağıMaket bıçağı
Düzlük mastarıDüzlük mastarı
Şerit MetreŞerit Metre
Bilinmeyen ölçülerBilinmeyen ölçüler
3

Glue them back to back

Glue the cork to the back of the PVC so the cork face takes pins and the PVC face takes the cutter. Carnegie allows glue, screws, rivets, magnets or a case; the glue is not given.

Bu adım için malzemeler:

Bilinmeyen malzemeBilinmeyen malzeme1 glue, not given

Gerekli aletler:

Lamine rulosuLamine rulosu
4

Score the folds and mark the grid

Score two lines across the full width, partly or fully through the layers, so the mat folds into three panels with its faces inward. Print measured grid lines on either face, or stick on a printed paper grid. How deep to score is not given.

Gerekli aletler:

Maket bıçağıMaket bıçağı
Düzlük mastarıDüzlük mastarı
5

Use it

Unfold the mat flat. Pin fabric and paper patterns to the cork side; turn it over and cut on the PVC side with a rotary cutter. Fold it up for storage.

Malzemeler

3
  • 1 cutting layer, self-healing grade not given
    Yer Tutucu
  • 1 pinning layer
    Yer Tutucu
  • 1 glue, not given
    Yer Tutucu

Gerekli Aletler

5

CC0 Kamu Malı

Bu plan CC0 lisansıyla yayınlanmıştır. İzin almadan kopyalayabilir, değiştirebilir, dağıtabilir ve herhangi bir amaçla kullanabilirsiniz.

Planı üzerinden ürün satın alarak Maker'ı destekleyin, böylece Maker Komisyonu Satıcılar tarafından belirlenen komisyonu kazanırlar veya bu Planın yeni bir versiyonunu oluşturun ve gelir paylaşımı için kendi Planınıza bağlantı olarak ekleyin.

Tartışma

(0)

Giriş yapın tartışmaya katılmak için

Yorumlar yükleniyor...