İşbirliği
SANAT
GÜZELLİK & SAĞLIK
ZANAAT
KÜLTÜR & TARİH
EĞLENCE
ÇEVRE
YİYECEK & İÇECEK
TERS MÜHENDİSLİK
BİLİMLER
SPOR
TEKNOLOJİ
GİYİLEBİLİR ÜRÜNLER
55-Gallon Open-Head Steel Drum to ICC Specification 17H (1964)
Youblob · CC0
Forge

Oluşturan

Forge

27. Ekim 2026NO
22
0
0
0
0

55-Gallon Open-Head Steel Drum to ICC Specification 17H (1964)

The open-top 55-gallon (208-litre) steel drum, built to the rule US railways and shippers used for single-trip removable-head drums: welded low-carbon steel body, three rolled hoops, a crowned bottom, and a lid clamped by a bolted ring over a gasket. Source: ICC Specification 17H, 49 CFR 78.118, Federal Register, 29 December 1964. The spec does not say how the bottom is joined. The litre figure, the gasket rubber and the machines are ours. Picture drawn by Youblob.
İleri
Production line

Talimatlar

1

Cut low-carbon steel sheets

Use low-carbon steel for body and heads. For a 55-gallon drum: body 18 gauge, bottom head 18 gauge, removable head 14 gauge (16 gauge if the cover has one or more corrugations near its edge). 18 gauge is 0.0478 in nominal and at least 0.0428 in; 14 gauge 0.0747 in and at least 0.0677 in, measured at least 3/8 in from an edge.

Bu adım için malzemeler:

Yumuşak Çelik SacYumuşak Çelik Sac1 body, bottom and lid sheets

Gerekli aletler:

Ağır iş metal makasıAğır iş metal makası
MikrometreMikrometre
2

Roll and weld the body

Roll the body sheet into a cylinder and weld the seam. The body seam must be welded.

Gerekli aletler:

Sac bükme silindirleriSac bükme silindirleri
Boru dikiş kaynak makinesiBoru dikiş kaynak makinesi
3

Roll in three hoops

Roll or swage three hoops into the body, one of them near the top curl.

Gerekli aletler:

Boncuk çekme makaralarıBoncuk çekme makaraları
4

Press crowned heads

Press the bottom head crowned (convex) by at least 3/8 in, not standing out beyond the level of the chime, and fit it to the body. The spec does not say how the bottom is joined.

Gerekli aletler:

Sac presiSac presi
5

Make the bolted ring and gasket

Make the closing ring from 12-gauge steel with drop-forged lugs, one of them threaded, and a 5/8 in bolt and nut (for drums over 30 gallons). Fit a gasket under the lid: gaskets are required.

Bu adım için malzemeler:

Yumuşak Çelik SacYumuşak Çelik Sac1 12-gauge strip for the ring
Yumuşak çelik yuvarlak çubukYumuşak çelik yuvarlak çubuk1 for the lugs
Altıköşe cıvata takımıAltıköşe cıvata takımı1 5/8 in bolt
Altıgen SomunAltıgen Somun1 5/8 in
Kauçuk levhaKauçuk levha1 gasket

Gerekli aletler:

Sac bükme silindirleriSac bükme silindirleri
Kalıplı düşme şahmerdanıKalıplı düşme şahmerdanı
Maket BıçağıMaket Bıçağı
6

Check capacity and mark

The drum must hold at least 4 % more than its marked 55 gallons, and no more than 5 % more (or 4 % plus 1 quart, whichever is greater). Emboss the marks: ICC-17H, STC (single-trip container), the maker, and the gauges, capacity and year.

Gerekli aletler:

Sac presiSac presi
7

Leak-test every drum

Test each drum by air pressure inside of at least 7 psi with its seams under water or covered with soapsuds or heavy oil. Reject leakers, or repair them the way they were made and test again.

Bu adım için malzemeler:

SuSu1 as required

Gerekli aletler:

Hava kompresörüHava kompresörü
Basınç GöstergesiBasınç Göstergesi
8

Type tests every four months

On drums taken at random and closed as for use: drop one filled with water to 98 % from 4 ft onto concrete so it lands diagonally on the chime, and hold another at 15 psi water pressure for 5 minutes. None may leak.

Bu adım için malzemeler:

SuSu1 as required

Gerekli aletler:

Basınç GöstergesiBasınç Göstergesi

Malzemeler

6

Gerekli Aletler

10

CC0 Kamu Malı

Bu plan CC0 lisansıyla yayınlanmıştır. İzin almadan kopyalayabilir, değiştirebilir, dağıtabilir ve herhangi bir amaçla kullanabilirsiniz.

Planı üzerinden ürün satın alarak Maker'ı destekleyin, böylece Maker Komisyonu Satıcılar tarafından belirlenen komisyonu kazanırlar veya bu Planın yeni bir versiyonunu oluşturun ve gelir paylaşımı için kendi Planınıza bağlantı olarak ekleyin.

Tartışma

(0)

Giriş yapın tartışmaya katılmak için

Yorumlar yükleniyor...