SANAT
GÜZELLİK & SAĞLIK
ZANAAT
KÜLTÜR & TARİH
EĞLENCE
ÇEVRE
YİYECEK & İÇECEK
TERS MÜHENDİSLİK
BİLİMLER
SPOR
TEKNOLOJİ
GİYİLEBİLİR ÜRÜNLER

Stopwatch: Lugrin, 1876
Henri Alfred Lugrin of New York patented this timing watch in 1876, US 176,231. Instead of placing the timing hand on the face, where it needs more gearing, he put the timing hand and its own dial on top of the watch movement. The hand is geared to the watch's second wheel through a pinion and wheel, and sits on its post by a tube and friction spring, so it can be stopped while the watch runs on. A heart-shaped cam and lever return it to the start, and the same lever also returns a minute hand on a small sectional dial beside it. A stop lever holds the timing hand. Lugrin's hand moves in fifths of a second but he calls it the quarter-second hand.
İleri
Watchmaker's work
Talimatlar
1
1
Timing hand and dial
Timing hand and dial
Mount the timing hand and its dial on top of the watch movement, the hand on a short centre post.
Bu adım için malzemeler:
Saat mekanizması1 adet
Ölçüm ibresi ve kadranı1 adetGerekli aletler:
Hassas cımbız seti
Tornavida takımı2
2
Gear it to the movement
Gear it to the movement
Gear the post to the second wheel of the watch train through a pinion and wheel.
Bu adım için malzemeler:
Ölçüm dişli takımı pinyonu ve çarkı1 adetGerekli aletler:
Hassas cımbız seti
Tornavida takımı3
3
Friction connection
Friction connection
Connect the hand to its post by a tube and friction spring, so the hand can be stopped without stopping the movement.
Bu adım için malzemeler:
Sürtünme yayı ve borusu1 adetGerekli aletler:
Hassas cımbız seti4
4
Minute recorder
Minute recorder
Place the minute hand and its sectional dial at one side of the timing hand, on a post geared with the barrel wheel, connected by the same kind of tube and friction spring.
Bu adım için malzemeler:
Dakika sayacı ibresi ve kadranı1 adetGerekli aletler:
Hassas cımbız seti
Tornavida takımı5
5
Return and stop
Return and stop
Fit the heart-shaped cams and the return lever, extended so one lever returns both hands to the start at once, and fit the stop lever.
Bu adım için malzemeler:
Kalp kamı ve geri dönüş kolu1 adet
Durdurma kolu1 adetGerekli aletler:
Hassas cımbız seti
Tornavida takımıMalzemeler
7- 1 adetYer Tutucu
- 1 adetYer Tutucu
- Yer Tutucu
- 1 adetYer Tutucu
- Yer Tutucu
- Yer Tutucu
- 1 adetYer Tutucu
Bu planla yapılan
İlgili Blueprint'ler
Bu blueprint'ler bilgi paylaşır — teknikler, malzemeler veya ilkeler
CC0 Kamu Malı
Bu plan CC0 lisansıyla yayınlanmıştır. İzin almadan kopyalayabilir, değiştirebilir, dağıtabilir ve herhangi bir amaçla kullanabilirsiniz.
Planı üzerinden ürün satın alarak Maker'ı destekleyin, böylece Maker Komisyonu Satıcılar tarafından belirlenen komisyonu kazanırlar veya bu Planın yeni bir versiyonunu oluşturun ve gelir paylaşımı için kendi Planınıza bağlantı olarak ekleyin.

