İşbirliği
SANAT
GÜZELLİK & SAĞLIK
ZANAAT
KÜLTÜR & TARİH
EĞLENCE
ÇEVRE
YİYECEK & İÇECEK
TERS MÜHENDİSLİK
BİLİMLER
SPOR
TEKNOLOJİ
GİYİLEBİLİR ÜRÜNLER
Teaspoon Sawn Short from Silver Sheet, Then Hammered Out (Payne 1914)
Arthur F. Payne · Public domain (1914)
Forge

Oluşturan

Forge

27. Ekim 2026NO
14
0
0
0
0

Teaspoon Sawn Short from Silver Sheet, Then Hammered Out (Payne 1914)

Saw the spoon out of flat silver smaller than it will end up: shorter, narrower in the bowl and thicker in the shank. Hammering then stretches it to full size. Arthur Payne said this method was used largely for silver teaspoons. Source: A. F. Payne, Art Metalwork with Inexpensive Equipment (1914), pp. 180–184; annealing from his chapter XI. The millimetre figure is ours. Picture: Payne's Fig. 155, the blank and the finished spoon.
Orta
1 day

Talimatlar

1

Saw out the short blank

Mark out and saw the blank from 15-gauge sterling silver (about 1.45 mm; our conversion): 5 in long, the bowl 1⅛ in wide and the shank 5⁄16 in wide. The finished spoon will be 6 in long with a bowl 1⅝ in wide.

Bu adım için malzemeler:

Sterling Gümüş LevhaSterling Gümüş Levha1 piece 15 gauge, enough for the 5 in blank

Gerekli aletler:

ÇizecekÇizecek
Kuyumcu TesteresiKuyumcu Testeresi
2

Stretch the bowl wider

Hammer the bowl on a flat anvil with the ball-pein hammer, held at a slight angle towards the side you want it to grow. This makes the bowl thinner and wider.

Gerekli aletler:

ÖrsÖrs
Küre başlı çekiçKüre başlı çekiç
3

Narrow the shank with the neck hammer

Hold the spoon on edge on a rounded convex stake and hammer the shank narrower with the neck hammer. This lengthens the spoon and makes the shank narrower and thicker. Widen the tip of the handle the same way as the bowl.

Gerekli aletler:

KazıkKazık
Boyun çekiçiBoyun çekiçi
Küre başlı çekiçKüre başlı çekiç
4

Anneal and repeat

When the silver gets hard, heat it to a dull red and plunge it into water, or let it cool. Repeat the hammering and annealing until the spoon is roughly to shape.

Bu adım için malzemeler:

SuSu1 as required

Gerekli aletler:

Bunsen bekiBunsen beki
MaşaMaşa
Cam kapCam kap
5

File and planish

File the rough edges smooth, then planish the whole spoon carefully.

Gerekli aletler:

Eğeler (El Eğesi)Eğeler (El Eğesi)
Perdah çekiciPerdah çekici
KazıkKazık
6

Polish out the file marks

Rub out all the scratches and file marks with emery cloth.

Gerekli aletler:

Zımpara beziZımpara bezi
7

Anneal to even the fire scale

Anneal the spoon thoroughly once more. Heated silver grows a thin white skin, the fire scale, and this brings it back over the spots where filing and polishing took it off, so the colour is even.

Bu adım için malzemeler:

SuSu1 as required

Gerekli aletler:

Bunsen bekiBunsen beki
MaşaMaşa
Cam kapCam kap
8

Planish with smooth hammers

Planish the spoon on smooth tools with smooth, bright hammers. This makes it stiff again after the annealing.

Gerekli aletler:

Perdah çekiciPerdah çekici
ÖrsÖrs
KazıkKazık
9

Final polish with rouge

Polish it lightly with a soft cotton flannel and a little red rouge.

Gerekli aletler:

Mücevher parlatma beziMücevher parlatma bezi
Kuyumcu kırmızısıKuyumcu kırmızısı

Malzemeler

2
  • 1 piece 15 gauge, enough for the 5 in blank
    Yer Tutucu
  • 2 as required
    Yer Tutucu

Gerekli Aletler

14

CC0 Kamu Malı

Bu plan CC0 lisansıyla yayınlanmıştır. İzin almadan kopyalayabilir, değiştirebilir, dağıtabilir ve herhangi bir amaçla kullanabilirsiniz.

Planı üzerinden ürün satın alarak Maker'ı destekleyin, böylece Maker Komisyonu Satıcılar tarafından belirlenen komisyonu kazanırlar veya bu Planın yeni bir versiyonunu oluşturun ve gelir paylaşımı için kendi Planınıza bağlantı olarak ekleyin.

Tartışma

(0)

Giriş yapın tartışmaya katılmak için

Yorumlar yükleniyor...