SANAT
GÜZELLİK & SAĞLIK
ZANAAT
KÜLTÜR & TARİH
EĞLENCE
ÇEVRE
YİYECEK & İÇECEK
TERS MÜHENDİSLİK
BİLİMLER
SPOR
TEKNOLOJİ
GİYİLEBİLİR ÜRÜNLER

Terephthalic Acid: Para-Xylene Oxidised by Air with Manganese and Bromide
Terephthalic acid is the acid half of PET. Both methyl groups of para-xylene are burnt to acid groups by air under pressure in hot acetic acid, with a little manganese salt and bromide as catalyst: the Mid-Century process of Saffer and Barker (US 2,833,816, 1958). The acid does not dissolve, so it is simply filtered off. Example 24 of the patent, all parts by weight.
The picture: our diagram of the reactor.
İleri
1 day
Talimatlar
1
1
Charge the reactor
Charge the reactor
Into a corrosion-resistant pressure reactor with a water-cooled condenser on top, put 75 parts para-xylene, 150 parts acetic acid, 1 part manganese acetate (tetrahydrate) and 0.75 part ammonium bromide.
Bu adım için malzemeler:
Para-Ksilen75 partsGerekli aletler:
Asetik asit (buzlu)
Mangan Asetat
Amonyum Bromür
Eşit kollu terazi
Basınçlı reaktör
Yoğuşturucu serpantini
Kimyasal Sıçrama Gözlüğü
Kimyasala Dayanıklı Eldiven2
2
Pressurise with air and heat to 385 °F
Pressurise with air and heat to 385 °F
Raise the pressure to 400 psig with air, blown in near the bottom. Set the vent so gas leaves at 3,000 volumes per hour per volume of liquid. Heat to 385 °F (196 °C), then switch the heat off: the reaction heats itself.
Gerekli aletler:
Basınçlı reaktör
Endüstriyel hava kompresörü
Yoğuşturucu serpantini
Laboratuvar Termometresi3
3
Hold at 385–400 °F
Hold at 385–400 °F
Once the first rush is over, heat as needed to hold 385–400 °F (196–204 °C), 1.5 hours in all. It is finished when the exit gas is back to 20–21 % oxygen (Orsat analysis).
Gerekli aletler:
Basınçlı reaktör
Laboratuvar Termometresi
Orsat Gaz Analizörü4
4
Cool, empty and filter
Cool, empty and filter
Cool to 185 °F (85 °C) and let the pressure off. Push the liquid out at 150–200 °F with nitrogen pressure, scrape out the solid, and filter everything together.
Gerekli aletler:
Azot Gazı Tüpü
Saplı Cam Huni
Süzgeç Kâğıdı
Kimyasala Dayanıklı Eldiven5
5
Wash and dry
Wash and dry
Wash the terephthalic acid twice with hot acetic acid (75 ml each in the example) and dry it. The patent got 115 parts by weight from 100 of para-xylene.
Gerekli aletler:
Asetik asit (buzlu)
Saplı Cam Huni
Süzgeç Kâğıdı
Kurutma fırınıMalzemeler
1- 75 partsYer Tutucu
Gerekli Aletler
15- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
Bu planla yapılan
İlgili Blueprint'ler
Bu blueprint'ler bilgi paylaşır — teknikler, malzemeler veya ilkeler
CC0 Kamu Malı
Bu plan CC0 lisansıyla yayınlanmıştır. İzin almadan kopyalayabilir, değiştirebilir, dağıtabilir ve herhangi bir amaçla kullanabilirsiniz.
Planı üzerinden ürün satın alarak Maker'ı destekleyin, böylece Maker Komisyonu Satıcılar tarafından belirlenen komisyonu kazanırlar veya bu Planın yeni bir versiyonunu oluşturun ve gelir paylaşımı için kendi Planınıza bağlantı olarak ekleyin.

