İşbirliği
SANAT
GÜZELLİK & SAĞLIK
ZANAAT
KÜLTÜR & TARİH
EĞLENCE
ÇEVRE
YİYECEK & İÇECEK
TERS MÜHENDİSLİK
BİLİMLER
SPOR
TEKNOLOJİ
GİYİLEBİLİR ÜRÜNLER

Test-Tube Hydrometer, Shot-Loaded and Calibrated (Boy Mechanic, 1915)
A hydrometer for specific gravity made from two test tubes: the small one, weighted with shot set in plaster and corked, floats in the liquid held in the large one, and the depth it sinks is read against marks copied from a bought hydrometer.
Başlangıç
An hour plus calibration
Talimatlar
1
1
How it floats
How it floats
Jupyter defteri yükleniyor…
2
2
Read the Boy Mechanic
Read the Boy Mechanic
"The specific gravity of any material is the ratio of the weights of equal volumes of the material and water."
3
3
Mount the jar
Mount the jar
Take two test tubes, one able to hold the other. Stand the large one upright in a hole bored in a small block of wood: it holds the liquid.
Bu adım için malzemeler:
Deney tüpleri1 adet
Sert Ağaç Tahtası1 adetGerekli aletler:
Kol matkabı ve ucu4
4
Load the float
Load the float
Put shot or other heavy metal in the bottom of the small tube until it floats upright: almost wholly under water if it is for liquids heavier than water, only just upright if for lighter ones. Fix the load with a little plaster of Paris.
Bu adım için malzemeler:
Deney tüpleri1 adet
Kurşun Külçe1 adet
Alçı (Paris Alçısı)1 adet5
5
Seal it
Seal it
Push a small cork into the open end and seal it with shellac, or with resin or sealing wax melted over it with a hot soldering iron.
Bu adım için malzemeler:
Mantar tıpalar1 adet
Gomalak vernik1 adet
Çam Reçinesi1 adetGerekli aletler:
Havya6
6
Mark the water line
Mark the water line
Float it in the large tube filled with pure water (rain water will do, distilled is better) and file a small mark level with the surface. In lighter liquids the mark sinks below the surface; in heavier ones it rises above.
Bu adım için malzemeler:
Damıtılmış Su1 adetGerekli aletler:
Eğeler (El Eğesi)7
7
Calibrate
Calibrate
Float your tube and a borrowed hydrometer in the same liquid and mark your tube to match its readings. Starting with a heavy liquid, add water little by little; both float lower each time, giving more marks.
Bu adım için malzemeler:
Damıtılmış Su1 adetGerekli aletler:
Eğeler (El Eğesi)8
8
Troubleshooting
Troubleshooting
Hydrometer troubleshooting.
Flow
Loading...
9
9
History and honest limits
History and honest limits
From **The Boy Mechanic, Book 2** (Popular Mechanics, 1915), p. 456 (checked on the archive.org scan boymechanicbook200chic2). Lead ingot stands in for his shot; the float numbers are our example.
Malzemeler
8- 1 adetYer Tutucu
- 1 adetYer Tutucu
- 1 adetYer Tutucu
- 1 adetYer Tutucu
- 1 adetYer Tutucu
- 1 adetYer Tutucu
- 1 adetYer Tutucu
- 2 adetYer Tutucu
Bu planla yapılan
İlgili Blueprint'ler
Bu blueprint'ler bilgi paylaşır — teknikler, malzemeler veya ilkeler
CC0 Kamu Malı
Bu plan CC0 lisansıyla yayınlanmıştır. İzin almadan kopyalayabilir, değiştirebilir, dağıtabilir ve herhangi bir amaçla kullanabilirsiniz.
Planı üzerinden ürün satın alarak Maker'ı destekleyin, böylece Maker Komisyonu Satıcılar tarafından belirlenen komisyonu kazanırlar veya bu Planın yeni bir versiyonunu oluşturun ve gelir paylaşımı için kendi Planınıza bağlantı olarak ekleyin.

