SANAT
GÜZELLİK & SAĞLIK
ZANAAT
KÜLTÜR & TARİH
EĞLENCE
ÇEVRE
YİYECEK & İÇECEK
TERS MÜHENDİSLİK
BİLİMLER
SPOR
TEKNOLOJİ
GİYİLEBİLİR ÜRÜNLER

The Loop-Measure Glove Stretcher: A Measuring Loop Kept in the Handle
A glove seller fitting a customer needed a stretcher to open the glove and a separate measure to know which size to open.
Moses Greensfelder of Harrisburg, Pennsylvania, received US 181,671, dated 29 August 1876, for "the combination of a hand-measure with a glove-stretcher, the measure being so arranged within the handle of the stretcher as to be capable of being drawn out for use, and is caused to regain its position in the handle by means of a suitable spring." The loop is put "around the widest part of the hand, when the index will stand at the number on the scale representing the size required."
This rung works out what the loop reads round hands of different shapes, then builds a tube handle with a spring-returned leather loop and an index, and measures several hands.
Orta
About 3 hours
Talimatlar
1
1
Loop reading round the hand
Loop reading round the hand
Jupyter defteri yükleniyor…
2
2
The stretcher it measures for
The stretcher it measures for
The embedded blueprint makes a hollow stretcher. Greensfelder puts the measure inside the stretcher's handle, so one tool sizes and stretches.
3
3
Read US 181,671
Read US 181,671
"A is the jaw of an ordinary glove-stretcher, which is chambered out to receive the measure B and spring a. C is a guide, which is attached to the free end of the spring a, and also to the inner end of the measure B."
"An index, b, is attached to the guide C, and slides in a slot, c, in the handle of the stretcher. A scale, d, representing the different sizes of gloves, is laid off on each side of the slot c."
4
4
Build the measuring handle and measure hands
Build the measuring handle and measure hands
**Handle.** Cut 25 cm of 10 mm aluminium tube. Saw a slot 12 cm long down one side with the hacksaw and file it smooth.
**Spring and guide.** Hook an extension spring to a pin through the tube's closed end. Hook the spring's free end to a short dowel that slides inside the tube as the guide, and screw a small screw through the slot into the guide as the index.
**Loop.** Cut a strip of leather 1 cm wide and 30 cm long, fix one end to the guide, and bring it out through the tube's open end as a loop with its other end fixed to the tube's outside.
**Scale.** Wrap the tape measure round a series of dowels and jars of known circumference, put the loop round each and mark where the index stands. Draw the scale beside the slot.
**Test.** Measure round five people's knuckles with the loop and with the tape measure, and measure each hand's width and thickness with the caliper. Compare with the notebook.
Bu adım için malzemeler:
Alüminyum boru0.25 metre
Çekme yayı1 adet
Sert ağaç kavelalar0.05 metre
Deri1 adet
Ahşap vidalar2 adet
Bristol Karton1 adet
Maskeleme bandı1 adetGerekli aletler:
Demir Testeresi
Eğeler (El Eğesi)
Kablosuz Matkap
Matkap Ucu Takımı
Maket Bıçağı
Tornavida takımı
Şerit Metre
Dijital Kumpas 6 İnç
Kurşun kalem5
5
A measure that sticks, stretches or reads wrong
A measure that sticks, stretches or reads wrong
Loop-measure glove stretcher troubleshooting.
Flow
Loading...
6
6
History and honest limits
History and honest limits
**Moses Greensfelder** of Harrisburg, Dauphin County, Pennsylvania, filed US 181,671 on 12 June 1876; it is dated 29 August 1876. His loop was of leather or other pliable material, the stretcher could be of wood, horn, rubber, ivory or metal, and the scale could go on the loop instead of the handle. Eight years later Augustus Traver chose a rigid measure over this flexible loop.
**Honest limits.** An aluminium tube, an extension spring and a leather strip stand in for his chambered jaw, spring and loop, and no historical glove-size scale is given: the scale is marked by test. The notebook treats the hand as an ellipse; its sizes are examples. Your measurements are the result.
Malzemeler
7- 0.25 metreYer Tutucu
- 1 adetYer Tutucu
- 0.05 metreYer Tutucu
- 1 adetYer Tutucu
- 2 adetYer Tutucu
- 1 adetYer Tutucu
- 1 adetYer Tutucu
Gerekli Aletler
9- Yer Tutucu
- Yer Tutucu
- 1 vendor sell this, none ship to you yetYer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- 1 vendor sell this, none ship to you yetYer Tutucu
- Yer Tutucu
- 1 vendor sell this, none ship to you yetYer Tutucu
İlgili Blueprint'ler
Bu blueprint'ler bilgi paylaşır — teknikler, malzemeler veya ilkeler
CC0 Kamu Malı
Bu plan CC0 lisansıyla yayınlanmıştır. İzin almadan kopyalayabilir, değiştirebilir, dağıtabilir ve herhangi bir amaçla kullanabilirsiniz.
Planı üzerinden ürün satın alarak Maker'ı destekleyin, böylece Maker Komisyonu Satıcılar tarafından belirlenen komisyonu kazanırlar veya bu Planın yeni bir versiyonunu oluşturun ve gelir paylaşımı için kendi Planınıza bağlantı olarak ekleyin.

