İşbirliği
SANAT
GÜZELLİK & SAĞLIK
ZANAAT
KÜLTÜR & TARİH
EĞLENCE
ÇEVRE
YİYECEK & İÇECEK
TERS MÜHENDİSLİK
BİLİMLER
SPOR
TEKNOLOJİ
GİYİLEBİLİR ÜRÜNLER

Tonoko: Iron Ochre Pulverized for Japanese Lacquer Groundwork (after Rein 1889)
Japanese lacquerers build a hard ground under the lacquer from a powder they call to-no-ko. Rein, who studied the workshops in the 1870s, names it plainly: iron ochre powder. Stirred with water to a stiff paste and tempered with raw lacquer, it becomes the kiri-ko and sabi grounds, and the sabi putty of kintsugi.
Result: tonoko, iron ochre ground to a fine powder.
Source: J. J. Rein, The Industries of Japan (1889), pp. 354 and 358. Rein says only 'pulverized'; mortar and sieve are ours. Picture drawn by Youblob.
Başlangıç
2 hours
Talimatlar
1
1
Pulverize the ochre
Pulverize the ochre
Crush and grind dry iron ochre in a stone mortar. Ours: until it is a fine, even powder.
Bu adım için malzemeler:
Ham aşı boyası1 as requiredGerekli aletler:
Taş Havan ve Havaneli2
2
Sift fine
Sift fine
Ours: pass the powder through a fine sieve and grind the coarse rest again. Keep it dry in a closed jar.
Gerekli aletler:
İnce Elek
Kapaklı Cam Kavanozlar3
3
Check: a stiff paste
Check: a stiff paste
A little stirred with water should make a smooth, stiff paste, as for kiri-ko, where it is then tempered with raw lacquer, a little brick dust and paste.
Gerekli aletler:
SuMalzemeler
1- 1 as requiredYer Tutucu
Bu planla yapılan
CC0 Kamu Malı
Bu plan CC0 lisansıyla yayınlanmıştır. İzin almadan kopyalayabilir, değiştirebilir, dağıtabilir ve herhangi bir amaçla kullanabilirsiniz.
Planı üzerinden ürün satın alarak Maker'ı destekleyin, böylece Maker Komisyonu Satıcılar tarafından belirlenen komisyonu kazanırlar veya bu Planın yeni bir versiyonunu oluşturun ve gelir paylaşımı için kendi Planınıza bağlantı olarak ekleyin.
