SANAT
GÜZELLİK & SAĞLIK
ZANAAT
KÜLTÜR & TARİH
EĞLENCE
ÇEVRE
YİYECEK & İÇECEK
TERS MÜHENDİSLİK
BİLİMLER
SPOR
TEKNOLOJİ
GİYİLEBİLİR ÜRÜNLER

Twin-Plunger Air-Chamber Churn: Two Plungers Throw the Cream Through a Middle Chamber
Andrews made the cream do the travelling, back and forth through a middle chamber.
John Andrews of Middlesex County, Massachusetts, received US 7,298, dated 23 April 1850, for a churn box divided by two vertical partitions into three apartments, with a series of holes "at or near its bottom" in each partition, "unprovided with valves." Each outer chamber has a plunger on a rod jointed to a brake, "one of the said plungers being elevated while the other is being depressed," so the cream is thrown "back and forth in several streams through the air chamber." Holes near the partitions' tops let air in under each rising plunger.
This rung works out the streams, then prints the partitions and plungers, builds the box and brake, and makes butter.
Orta
About 5 hours, plus printing
Talimatlar
1
1
The streams
The streams
Jupyter defteri yükleniyor…
2
2
Two dashers worked oppositely by one lever before it
Two dashers worked oppositely by one lever before it
The embedded blueprint works two dashers in one churn from a lever. Andrews puts each plunger in its own chamber so the cream must flow between them.
3
3
Read US 7,298
Read US 7,298
"Through each of the partitions a, b, and near the upper part thereof, I make one or more holes d, d, d, &c., as seen in Figs. 2 and 3, they being so arranged that the plunger F or F', during its upward stroke, shall pass partially or wholly above them, and in order to allow air to rush through said hole or holes and into the space directly under the plunger. The descent of the plunger forces such air into and through the cream."
4
4
Print the parts
Print the parts
Print two partitions (/uploads/blueprints/twin-plunger-air-chamber-churn-partition.stl) with their foot holes and air holes, two plungers (/uploads/blueprints/twin-plunger-air-chamber-churn-plunger.stl) and the brake hub (/uploads/blueprints/twin-plunger-air-chamber-churn-brake-hub.stl). Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.
Bu adım için malzemeler:
PETG filament1 adetGerekli aletler:
FDM 3B yazıcı5
5
The box
The box
Take a food-safe box about 230 × 120 × 160 mm. Glue the two partitions across it in silicone, dividing it into three equal chambers.
Bu adım için malzemeler:
Gıda sınıfı saklama kabı1 adetGerekli aletler:
İşkenceler
Şerit Metre6
6
Plungers and brake
Plungers and brake
Glue a 12 mm hardwood dowel rod in each plunger. Screw two pine standards to the box's middle, pass a dowel through them as the rocker shaft, and fix a pine brake across it with the hub. Join each rod to an end of the brake on a loose screw, so one plunger rises as the other falls.
Bu adım için malzemeler:
Sert ağaç kavelalar1 adet
Çam tahta1 adet
Makine vidaları1 adet
Altıgen Somun1 adet
Ahşap Tutkalı1 adet
#8 x 1" ahşap vidası1 adetGerekli aletler:
El Testeresi
Kablosuz Matkap
Matkap Ucu Takımı
Tornavida takımı7
7
The patent drawing
The patent drawing
US 7,298 drawing sheet, public domain (expired patent).

8
8
Rock the brake and make butter
Rock the brake and make butter
Let the heavy cream stand until it reaches about 15 °C, checked with the thermometer. Pour in 1.5 litres, below the top holes. Rock the brake steadily up and down; time until the butter comes. Pour off the buttermilk, add cold water, churn a little and pour off again until it runs clear; work in a pinch of salt and weigh the butter.
Bu adım için malzemeler:
Yağlı krema1500 ml
İri Deniz Tuzu1 adet
Su1 adetGerekli aletler:
Takılı kalan problu termometre
Kronometre
Dijital Mutfak Terazisi
Büyük paslanmaz çelik karıştırma kâsesi9
9
Plungers that stick, cream over the top
Plungers that stick, cream over the top
Twin-plunger air-chamber churn troubleshooting.
Flow
Loading...
10
10
History and honest limits
History and honest limits
**John Andrews** of Middlesex County, Massachusetts, received US 7,298, dated 23 April 1850. He wrote that the streams "so intermingle air with the lacteal matter as to very quickly oxygenate and cause a separation"; that is his account. He claimed the combination of the external chambers, their plungers and passages with the middle or air chamber, and the air-entering passages d.
**Honest limits.** A food-safe box and printed parts stand in for his wooden box and plungers. FDM prints hold food in their layer lines, so wash well and replace when worn. Your times and weights are the result.
Malzemeler
12- 1 adetYer Tutucu
- 1 adetYer Tutucu
- 1 adetYer Tutucu
- 1 adetYer Tutucu
- 1 adetYer Tutucu
- 1 adetYer Tutucu
- 1 adetYer Tutucu
- 1 adetYer Tutucu
- 1 adetYer Tutucu
- 1500 mlYer Tutucu
- 1 adetYer Tutucu
- 1 adetYer Tutucu
Gerekli Aletler
11- Yer Tutucu
- Yer Tutucu
- 1 vendor sell this, none ship to you yetYer Tutucu
- Yer Tutucu
- 1 vendor sell this, none ship to you yetYer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
İlgili Blueprint'ler
Bu blueprint'ler bilgi paylaşır — teknikler, malzemeler veya ilkeler

Double-Dasher Lever Churn: Swing One Lever, One Dasher Rises as the Other Falls
Woody tarafından
Ağaç işleri
12
0
0
0
0
0

Interraking Plunger Churn: Two Rakes Worked Oppositely by a Double Crank
Martin tarafından
YİYECEK & İÇECEK
5
0
0
0
0
0

Air-Pump Annular Dasher Churn: A Pump in the Middle, a Ring Dasher Round It
Martin tarafından
YİYECEK & İÇECEK
13
0
0
0
0
0
CC0 Kamu Malı
Bu plan CC0 lisansıyla yayınlanmıştır. İzin almadan kopyalayabilir, değiştirebilir, dağıtabilir ve herhangi bir amaçla kullanabilirsiniz.
Planı üzerinden ürün satın alarak Maker'ı destekleyin, böylece Maker Komisyonu Satıcılar tarafından belirlenen komisyonu kazanırlar veya bu Planın yeni bir versiyonunu oluşturun ve gelir paylaşımı için kendi Planınıza bağlantı olarak ekleyin.