İşbirliği
SANAT
GÜZELLİK & SAĞLIK
ZANAAT
KÜLTÜR & TARİH
EĞLENCE
ÇEVRE
YİYECEK & İÇECEK
TERS MÜHENDİSLİK
BİLİMLER
SPOR
TEKNOLOJİ
GİYİLEBİLİR ÜRÜNLER

Uncapping Knife: the Bingham Knife (Hasluck, 1905)
The Bingham honey knife: a trowel-like blade of good saw steel, sharpened all round from the underside, riveted to a cranked 3/8 in tang so the handle stands about an inch above the comb.
Hasluck warns it is a job only for a maker with the means for that kind of work.
Source: P. N. Hasluck, Beehives and Bee Keepers' Appliances (1905), p. 155. Picture: the book's Fig. 152.
İleri
Unknown
Talimatlar
1
1
Shape the blade
Shape the blade
Cut a blade of good saw steel 6 or 7 in long and 2 to 3 in wide to the pattern of Fig. 152, like a mason's trowel.
Bu adım için malzemeler:
Yay çeliği şeridi1 6-7 x 2-3 inGerekli aletler:
Soğuk keski
Metal Eğe2
2
Make the tang
Make the tang
Make a tang of 3/8 in iron or steel: point one end to fit the handle and flatten the other so it can be riveted to the blade.
Bu adım için malzemeler:
Yumuşak çelik yuvarlak çubuk1 3/8 inGerekli aletler:
Demirci Ocağı
Örs
Çekiç
Metal Eğe3
3
Rivet and set the tang
Rivet and set the tang
Rivet the flattened end to the blade with two rivets countersunk into the underside of the blade and ground flush. Bend the tang so that with the blade flat on a board the handle stands about 1 in above it.
Bu adım için malzemeler:
Demir perçinler2 adetGerekli aletler:
El matkabı
Havşa Ucu Seti
Çekiç
Bileme taşı çarkı4
4
Handle and edge
Handle and edge
Fit the handle on the pointed end of the tang. Sharpen the blade all round like a chisel, from the underside only.
Bu adım için malzemeler:
Bilinmeyen malzeme1 handle, material not givenGerekli aletler:
Bileme taşı çarkıMalzemeler
4- 1 6-7 x 2-3 inYer Tutucu
- 1 3/8 inYer Tutucu
- 2 adetYer Tutucu
- 1 handle, material not givenYer Tutucu
Bu planla yapılan
CC0 Kamu Malı
Bu plan CC0 lisansıyla yayınlanmıştır. İzin almadan kopyalayabilir, değiştirebilir, dağıtabilir ve herhangi bir amaçla kullanabilirsiniz.
Planı üzerinden ürün satın alarak Maker'ı destekleyin, böylece Maker Komisyonu Satıcılar tarafından belirlenen komisyonu kazanırlar veya bu Planın yeni bir versiyonunu oluşturun ve gelir paylaşımı için kendi Planınıza bağlantı olarak ekleyin.
