İşbirliği
SANAT
GÜZELLİK & SAĞLIK
ZANAAT
KÜLTÜR & TARİH
EĞLENCE
ÇEVRE
YİYECEK & İÇECEK
TERS MÜHENDİSLİK
BİLİMLER
SPOR
TEKNOLOJİ
GİYİLEBİLİR ÜRÜNLER
Wedging Table: Plaster-Topped with a Cutting Wire (Binns, 1910)
Woody

Oluşturan

Woody

4. Kasım 2026NO
9
0
0
0
0

Wedging Table: Plaster-Topped with a Cutting Wire (Binns, 1910)

The potter's wedging table Binns taught: a strong table with a 30 by 20 in top of two-inch plank, edged to make a trough filled with plaster, and a fine brass wire stretched diagonally from a post on one side for cutting the clay. Clay is cut on the wire and slapped down on the plaster, fifteen or twenty times, until it is even; wet the plaster if it stiffens the clay too fast. Source: C. F. Binns, The Potter's Craft (1910), p. 79. Picture: the book's text.
Başlangıç
Unknown

Talimatlar

1

Make the top

Build a strong table whose top, about 30 by 20 in, is of two-inch plank. Nail a raised edge 2 in high firmly to the sides to form a trough.

Bu adım için malzemeler:

Kereste tahtasıKereste tahtası1 two-inch plank, about 30 x 20 in
TahtaTahta1 raised edge, 2 in high
Demir ÇivilerDemir Çiviler1 adet

Gerekli aletler:

El TesteresiEl Testeresi
ÇekiçÇekiç
2

Pour the plaster

Fill the trough with plaster and let it harden.

Bu adım için malzemeler:

Alçı (Paris Alçısı)Alçı (Paris Alçısı)1 adet

Gerekli aletler:

ÇekiçÇekiç
3

Fit the post and wire

Fasten an upright post in the centre of one side and stretch a fine brass wire from its top to the other side of the table, making a diagonal. The worker stands on the side opposite the post.

Bu adım için malzemeler:

Bilinmeyen malzemeBilinmeyen malzeme1 upright post, material not given
İnce pirinç telİnce pirinç tel1 fine brass wire
Demir ÇivilerDemir Çiviler1 adet

Gerekli aletler:

ÇekiçÇekiç
El TesteresiEl Testeresi

Malzemeler

6

Gerekli Aletler

2

CC0 Kamu Malı

Bu plan CC0 lisansıyla yayınlanmıştır. İzin almadan kopyalayabilir, değiştirebilir, dağıtabilir ve herhangi bir amaçla kullanabilirsiniz.

Planı üzerinden ürün satın alarak Maker'ı destekleyin, böylece Maker Komisyonu Satıcılar tarafından belirlenen komisyonu kazanırlar veya bu Planın yeni bir versiyonunu oluşturun ve gelir paylaşımı için kendi Planınıza bağlantı olarak ekleyin.

Tartışma

(0)

Giriş yapın tartışmaya katılmak için

Yorumlar yükleniyor...