Співпраця
МИСТЕЦТВО
КРАСА ТА ЗДОРОВ'Я
РЕМЕСЛО
КУЛЬТУРА ТА ІСТОРІЯ
РОЗВАГИ
СЕРЕДОВИЩЕ
ЇЖА ТА НАПІЇ
ЗБОРНА ІНЖЕНЕРІЯ
НАУК
СПОРТ
ТЕХНОЛОГІЯ
НОСИМО
Cane Glue Brush: the Bark Stripped from One End and the Fibres Hammered Loose (Adamson, Amateur Work, 1887)
Woody

Створено

Woody

14. листопад 2026NO
4
0
0
0
0

Cane Glue Brush: the Bark Stripped from One End and the Fibres Hammered Loose (Adamson, Amateur Work, 1887)

The fret-cutter's glue brush recommended by D. B. Adamson in Amateur Work (1887): a piece of cane with the hard outer skin cut away at one end and the end hammered until the fibres loosen into a stiff brush, "better than any other" for rubbing glue into wood.
Початківець
A few minutes

Інструкції

1

Read Adamson

"Nothing is better than a piece of cane beaten out at one end."
2

Strip the end

Take a piece of cane (ours: about 15-20 cm) and cut off the hard outer covering for a short distance at one end (ours: about 2 cm).

Матеріали для цього кроку:

РотангРотанг1 штука

Необхідні інструменти ({count})

Будівельний ніжБудівельний ніж
3

Beat out the fibres

Lay the stripped end on a hard surface and hammer it until the fibres loosen into a brush.

Необхідні інструменти ({count})

МолотокМолоток
4

Use it

Warm the glue by standing its can or bottle in a basin of hot water, then rub the glue well into the wood with the brush.

Матеріали для цього кроку:

ВодаВода1 штука

Необхідні інструменти ({count})

ВідроВідро
КлейКлей
5

Troubleshooting

Cane brush troubleshooting.

Flow

Loading...
6

History and honest limits

From D. B. Adamson, "Fretsaw Work and Marquetry Cutting" III, **Amateur Work, Illustrated**, vol. VII (1887), p. 230 (checked on the archive.org scan amateurworkillus71887lond). He gives no lengths: those and the knife are ours.

Матеріали

2
  • 1 штука
    Заповнювач
  • 1 штука
    Заповнювач

Необхідні інструменти

4
  • Заповнювач
  • Заповнювач
  • Заповнювач
  • Заповнювач

За цим кресленням виготовляють

CC0 Суспільне надбання

Це креслення випущено під ліцензією CC0. Ви можете вільно копіювати, змінювати, поширювати та використовувати цю роботу для будь-яких цілей без запиту дозволу.

Підтримайте мейкера, купуючи продукти через його креслення, де він отримує Комісію мейкера встановлену вендорами, або створіть нову ітерацію цього креслення та включіть його як зв'язок у власне креслення для розподілу доходу.

Обговорення

(0)

Увійти щоб приєднатися до обговорення

Завантаження коментарів...