МИСТЕЦТВО
КРАСА ТА ЗДОРОВ'Я
РЕМЕСЛО
КУЛЬТУРА ТА ІСТОРІЯ
РОЗВАГИ
СЕРЕДОВИЩЕ
ЇЖА ТА НАПІЇ
ЗБОРНА ІНЖЕНЕРІЯ
НАУК
СПОРТ
ТЕХНОЛОГІЯ
НОСИМО
Retrofocus Wide-Angle Lens
Clay

Створено

Clay

22. вересень 2026DK
0
0
0
0
0

Retrofocus Wide-Angle Lens

Reflex cameras put a mirror between the lens and the film, and a conventional wide-angle lens needs to sit closer to the film than the mirror allows. Pierre Angénieux in Paris reversed the telephoto idea: a diverging group in front, a converging group well behind it, so the lens's focus lies further back than its focal length. **US 2,649,022**, "Wide-angle photographic objective lens assembly", Angénieux, filed 29. July 1950, granted 18. August 1953, describes an objective whose "distance along the axis between the back surface of the last lens and the focal plane … is relatively very large with respect to the focal length". (His US 2,649,021 of the same day is a different lens - a large-aperture projection objective.) **You build one on the bench**, measure its back focus against its focal length, and fit a mirror in the room it leaves.
Початківець
90 minutes

Інструкції

1

Two lenses, reversed

Front: concave about -50 mm, facing the scene. Rear: convex about 50 mm, 60 mm behind it. Aim out of a window.

Матеріали для цього кроку:

Увігнута лінзаУвігнута лінза1 штука
Набір збиральних лінзНабір збиральних лінз1 набір

Необхідні інструменти ({count})

Оптична лава з рейкоюОптична лава з рейкою
Набір тримачів для лінзНабір тримачів для лінз
2

Find the focus

Move a tracing-paper screen until the distant scene is sharp. Measure rear lens to screen: the back focus. Measure the height of one far feature on the screen.

Матеріали для цього кроку:

Рулон паперу для копіювання викрійокРулон паперу для копіювання викрійок1 аркуш
Малярна стрічкаМалярна стрічка1 рулон

Необхідні інструменти ({count})

Сталева лінійкаСталева лінійка
3

Compare one lens

Remove the concave lens. The +50 mm lens alone focuses about 50 mm behind itself; measure the same feature's height.

Необхідні інструменти ({count})

Сталева лінійкаСталева лінійка
4

Fit the mirror

Put the concave lens back. Stand a small mirror at 45 degrees between the rear lens and the screen position and turn the screen to catch the image from the side - a reflex viewfinder. With the single lens there is no room.

Матеріали для цього кроку:

Пласке дзеркалоПласке дзеркало1 штука
5

Back focus vs focal length

Завантаження блокнота Jupyter…
6

History & Context

**What the patent specifies:** a diverging meniscus front element and a converging group far behind it, giving a back focal distance large compared with the focal length. **Modern build (derived):** two stock lenses and a mirror. Angénieux sold it as the Retrofocus; nearly every SLR wide-angle since uses the layout. Its limits: the asymmetry brings barrel distortion, and the big front element makes the lens larger and heavier than a symmetric design.
Крок 6 - Image 1

Матеріали

5

Необхідні інструменти

3

Пов'язані креслення

Ці креслення діляться знаннями — техніки, матеріали або принципи

CC0 Суспільне надбання

Це креслення випущено під ліцензією CC0. Ви можете вільно копіювати, змінювати, поширювати та використовувати цю роботу для будь-яких цілей без запиту дозволу.

Підтримайте мейкера, купуючи продукти через його креслення, де він отримує Комісію мейкера встановлену вендорами, або створіть нову ітерацію цього креслення та включіть його як зв'язок у власне креслення для розподілу доходу.

Обговорення

(0)

Увійти щоб приєднатися до обговорення

Завантаження коментарів...