
Building a Qanun — The Plucked Zither with Microtone Levers
Інструкції
A zither you pluck, with levers
A zither you pluck, with levers
Build the trapezoidal box
Build the trapezoidal box
Матеріали для цього кроку:
Baltic Birch Plywood (1/8 inch, 12x12, 10-Pack)1 штука
Dry Softwood Board1 штука
PVA Wood Glue1 штукаНеобхідні інструменти ({count})
HacksawSet the pins and string it
Set the pins and string it
Матеріали для цього кроку:
Tuning Pegs9 штук
Steel Music Wire 0.032"1 штукаНеобхідні інструменти ({count})
AwlStand the bridge
Stand the bridge
Необхідні інструменти ({count})
Sloyd Carving KnifeFit the mandal levers
Fit the mandal levers
Матеріали для цього кроку:
Bronze Wire1 штукаНеобхідні інструменти ({count})
Metal FileTune the courses
Tune the courses
Play with finger picks
Play with finger picks
Flip a lever, change the note
Flip a lever, change the note
Compendium — the lever that re-tunes a string
Compendium — the lever that re-tunes a string
Матеріали
6- Заповнювач
- 1 штукаЗаповнювач
- 1 штукаЗаповнювач
- 9 штукЗаповнювач
- 1 штукаЗаповнювач
- 1 штукаЗаповнювач
Необхідні інструменти
4- Заповнювач
- Заповнювач
- Заповнювач
- Заповнювач
You can swap these in
Can't get one of the materials? Swap it for an equivalent — these work just as well.
- Instead of Sloyd Carving Knife, try:
Blunt Collection Knife
Gilder's Knife
Knife
Sharp Cinnamon Knife - Instead of PVA Wood Glue, try:
Polyurethane Glue - Instead of Baltic Birch Plywood (1/8 inch, 12x12, 10-Pack), try:
CDX Softwood Plywood
Fire-Rated Plywood - Instead of Steel Music Wire 0.032", try:
Hook-Up Wire - Assortment (Stranded)
Tie Wire
Thin Brass Wire (for cleaning spouts)
Slip Ring - 6 Wire (2A)
Bezel Wire
Пов'язані креслення
Ці креслення діляться знаннями — техніки, матеріали або принципи
Related blueprints
Other builds that share materials, tools, or techniques with this one.






CC0 Суспільне надбання
Це креслення випущено під ліцензією CC0. Ви можете вільно копіювати, змінювати, поширювати та використовувати цю роботу для будь-яких цілей без запиту дозволу.
Підтримайте мейкера, купуючи продукти через його креслення, де він отримує Комісію мейкера встановлену вендорами, або створіть нову ітерацію цього креслення та включіть його як зв'язок у власне креслення для розподілу доходу.