Співпраця
МИСТЕЦТВО
КРАСА ТА ЗДОРОВ'Я
РЕМЕСЛО
КУЛЬТУРА ТА ІСТОРІЯ
РОЗВАГИ
СЕРЕДОВИЩЕ
ЇЖА ТА НАПІЇ
ЗБОРНА ІНЖЕНЕРІЯ
НАУК
СПОРТ
ТЕХНОЛОГІЯ
НОСИМО

Aspirator: a Vessel of Water with a Tap at the Bottom (Sutton, 1904)
The simplest aspirator: a closed vessel of known volume, full of water, with a tap at the bottom. As the water runs out it draws gas in through the apparatus attached to it, and the volume of water run out is the volume of gas drawn through.
Result: an aspirator that draws a measured volume of gas, for example 1/10 cubic foot, through an absorber at a steady rate.
Source: F. Sutton, A Systematic Handbook of Volumetric Analysis (1904), pp. 581-582. Unknown: the vessel's material and the tap. Picture: p. 581 of the book.
Початківець
Unknown
Інструкції
1
1
Fit the vessel
Fit the vessel
Take a vessel of known volume, for example exactly 1/10 cubic foot, and fix a tap at its bottom. Close its mouth tightly with a cork carrying a glass tube, which connects to the absorber the gas is to pass through. Ours: a large clear glass bottle. Not given: the vessel's material, the tap.
Матеріали для цього кроку:
Скляна бутля (прозора)1 aspirator vessel
Невідомий вентиль1 bottom tap
Корки1 stopper
Скляна трубка1 inlet tubeНеобхідні інструменти ({count})
Настільний пальник склодува
Невідомі розміри2
2
Set the flow and draw the gas
Set the flow and draw the gas
Fill the vessel with water, connect the absorber, check that everything is tight, and open the tap partly: the small outflow of water draws the gas through the absorber. For an even rate, fit about a yard of tubing to the outlet, for a steady head, ending in a fine jet tried beforehand to give the time wanted; used reversed, the jet clogs less. When the vessel is empty the gas stops, and the water run out measures the gas passed. Collect and measure the water if the vessel is not of fixed volume.
Матеріали для цього кроку:
Гумова трубка1 outlet tubing
Скляна трубка1 jetНеобхідні інструменти ({count})
Мірний циліндрМатеріали
5- 1 aspirator vesselЗаповнювач
- 1 bottom tapЗаповнювач
- 1 stopperЗаповнювач
- 1 jetЗаповнювач
- 1 outlet tubingЗаповнювач
Необхідні інструменти
3- Заповнювач
- Заповнювач
- Заповнювач
Матеріали з пов'язаних креслень

10% атрибуція
Blowing a Glass Bottle by Hand — Free-Blown Vessel Shaping
від Forge
Виробництво скла
70
0
0
0
5
0

10% атрибуція
Natural Cork Stoppers from Bark
від Woody
Деревообробка
47
0
0
0
3
0

10% атрибуція
Glass Tube: Drawn by Two Glassmakers Walking Apart (Pellatt, 1849)
від Charlie
неорганічні
9
0
0
0
2
0

10% атрибуція
Natural Rubber Tubing, Bands and Sheet: Sulfur-Cured with Heat
від Mary
Хімія
16
0
0
0
2
0
За цим кресленням виготовляють
CC0 Суспільне надбання
Це креслення випущено під ліцензією CC0. Ви можете вільно копіювати, змінювати, поширювати та використовувати цю роботу для будь-яких цілей без запиту дозволу.
Підтримайте мейкера, купуючи продукти через його креслення, де він отримує Комісію мейкера встановлену вендорами, або створіть нову ітерацію цього креслення та включіть його як зв'язок у власне креслення для розподілу доходу.
