МИСТЕЦТВО
КРАСА ТА ЗДОРОВ'Я
РЕМЕСЛО
КУЛЬТУРА ТА ІСТОРІЯ
РОЗВАГИ
СЕРЕДОВИЩЕ
ЇЖА ТА НАПІЇ
ЗБОРНА ІНЖЕНЕРІЯ
НАУК
СПОРТ
ТЕХНОЛОГІЯ
НОСИМО
Barium Ferrite Disc Magnet: Barium Carbonate and Iron Oxide Sintered (Went, Philips 1956)
Charlie

Створено

Charlie

28. жовтень 2026DE
0
0
0
0
0

Barium Ferrite Disc Magnet: Barium Carbonate and Iron Oxide Sintered (Went, Philips 1956)

The dark grey ceramic magnet on fridges and in loudspeakers is barium ferrite. It is made from two cheap powders: one part barium carbonate to six of iron oxide, milled, fired, milled again, pressed and sintered. No cobalt or nickel is needed. This is Example 34 of the Philips patent. Fired 4 hours at 1100 °C, its rod held 1,375 gauss with a coercive force of 3,350 oersted. Source: J. J. Went, G. W. van Oosterhout and E. W. Gorter (Philips), US 2,762,777 (1956). They pressed rods; the claim covers "a body of a desired shape", and the disc size is ours. The patent does not say how to magnetise it; our way is stated. Picture: ferrite magnets, Omegatron, Wikimedia Commons, CC BY-SA 3.0.
Просунутий
2 days

Інструкції

1

Weigh one part barium carbonate to six of iron oxide

Weigh 39.5 g of barium carbonate (0.2 mol) and 191.7 g of ferric oxide, Fe2O3 (1.2 mol). Barium carbonate is poisonous if swallowed: ours, gloves and a dust respirator.

Матеріали для цього кроку:

Карбонат барію (вітерит)Карбонат барію (вітерит)39.5 г
Оксид заліза(III)Оксид заліза(III)191.7 г

Необхідні інструменти ({count})

Важільні терезиВажільні терези
Гумові рукавичкиГумові рукавички
Респіратор P100Респіратор P100
2

Mill with ethanol for 4 hours

Grind the mixture with ethanol in an iron ball mill for 4 hours. Let the ethanol evaporate, then dry the powder in a drying oven.

Необхідні інструменти ({count})

Залізний кульовий млинЗалізний кульовий млин
Етанол - лабораторної чистоти, 95 %Етанол - лабораторної чистоти, 95 %
Сушильна пічСушильна піч
3

Presinter at 1000 °C for 4 hours

Fire the dry powder in air at 1000 °C for 4 hours (ours: in a lidded porcelain crucible in a muffle furnace). Let it cool.

Необхідні інструменти ({count})

Муфельна пічМуфельна піч
Тигель із накривкою (порцеляновий)Тигель із накривкою (порцеляновий)
Кліщі для тиглівКліщі для тиглів
Термостійкі рукавиціТермостійкі рукавиці
4

Mill again for 4 hours

Grind the presintered product with ethanol in the ball mill for another 4 hours. Let the ethanol evaporate.

Необхідні інструменти ({count})

Залізний кульовий млинЗалізний кульовий млин
Етанол - лабораторної чистоти, 95 %Етанол - лабораторної чистоти, 95 %
Сушильна пічСушильна піч
Респіратор P100Респіратор P100
5

Press discs at 1.5 tons per cm²

Press the powder at 1.5 tons/cm². The patent pressed rods; we press discs. Ours: a die 20 mm across, so about 4.7 tonnes on the punch (our arithmetic: 1.5 × 3.14 cm²).

Необхідні інструменти ({count})

Гідравлічний пресГідравлічний прес
Прес-форма для дисківПрес-форма для дисків
6

Sinter for 4 hours

Sinter the discs for 4 hours in oxygen or in air. The patent's results: at 1100 °C, 1,375 gauss and 3,350 oersted; at 1200 °C, 1,400 and 3,100; at 1300 °C, 1,850 and 1,780. Hotter gives a stronger but less stubborn magnet.

Необхідні інструменти ({count})

Муфельна пічМуфельна піч
Кліщі для тиглівКліщі для тиглів
Термостійкі рукавиціТермостійкі рукавиці
7

Magnetise the discs

The patent gives no magnetising method. Ours: lay a disc with its faces against the poles of a strong electromagnet, switch the current on, then off. Find which face is north with a compass.

Необхідні інструменти ({count})

ЕлектромагнітЕлектромагніт
КомпасКомпас

Матеріали

2

Необхідні інструменти

14

За цим кресленням виготовляють

CC0 Суспільне надбання

Це креслення випущено під ліцензією CC0. Ви можете вільно копіювати, змінювати, поширювати та використовувати цю роботу для будь-яких цілей без запиту дозволу.

Підтримайте мейкера, купуючи продукти через його креслення, де він отримує Комісію мейкера встановлену вендорами, або створіть нову ітерацію цього креслення та включіть його як зв'язок у власне креслення для розподілу доходу.

Обговорення

(0)

Увійти щоб приєднатися до обговорення

Завантаження коментарів...