Співпраця
МИСТЕЦТВО
КРАСА ТА ЗДОРОВ'Я
РЕМЕСЛО
КУЛЬТУРА ТА ІСТОРІЯ
РОЗВАГИ
СЕРЕДОВИЩЕ
ЇЖА ТА НАПІЇ
ЗБОРНА ІНЖЕНЕРІЯ
НАУК
СПОРТ
ТЕХНОЛОГІЯ
НОСИМО
Closet Shoe Rack: Wedge-Shaped Pockets on the Wall With a Slatted Bottom for Dirt to Fall Through (Boy Mechanic, 1913)
Woody

Створено

Woody

13. листопад 2026NO
5
0
0
0
0

Closet Shoe Rack: Wedge-Shaped Pockets on the Wall With a Slatted Bottom for Dirt to Fall Through (Boy Mechanic, 1913)

A shoe rack "that can be placed on the wall in the clothes closet", from The Boy Mechanic (1913): two boards 9 in wide and about 3 ft long, held apart by six wedge-shaped partitions so the pockets open wider at the top, and a slatted bottom that lets the dirt fall through. Sizes are the book's. Contributed to Popular Mechanics by Guy H. Harvey of Mill Valley, California.
Початківець
About 2 hours

Інструкції

1

The partitions

Завантаження блокнота Jupyter…
2

Read The Boy Mechanic

"Two boards, 9 in. wide and about 3 ft. long, with six partitions between, as shown, will make pockets about 6 in. long. The width of the pockets at the bottom is 2 in. and at the top 5 in."
3

Cut the boards and partitions

Cut two pine boards 9 in wide and about 3 ft long, the back and the front. Cut six partitions as wedges from the notebook, 9 in tall, 2 in deep at the bottom and 5 in at the top.

Матеріали для цього кроку:

Соснова дошкаСоснова дошка1 штука

Необхідні інструменти ({count})

РулеткаРулетка
ОлівецьОлівець
Столярний косинецьСтолярний косинець
Ручна пилкаРучна пилка
4

Assemble the pockets

Nail the partitions to the back board, square to it, one at each end and the rest spaced about 6 in apart. Nail the front board to their sloping edges, so it leans out and the pockets open wider at the top.

Матеріали для цього кроку:

ЦвяхиЦвяхи1 штука

Необхідні інструменти ({count})

Молоток-цвяходерМолоток-цвяходер
5

Fit the slatted bottom

Nail strips across the bottom of the pockets with gaps between them, as his Fig. 1, so the dirt from the shoes falls through.

Матеріали для цього кроку:

Смуга твердої деревиниСмуга твердої деревини1 штука
ЦвяхиЦвяхи1 штука

Необхідні інструменти ({count})

Ручна пилкаРучна пилка
Молоток-цвяходерМолоток-цвяходер
6

Hang it

Screw the back board to the wall of the clothes closet (ours), and put a pair of shoes toe-down in each pocket.

Матеріали для цього кроку:

Шурупи по деревуШурупи по дереву1 штука

Необхідні інструменти ({count})

Ручний дрильРучний дриль
Набір викрутокНабір викруток
7

Troubleshooting

Shoe rack troubleshooting.

Flow

Loading...
8

History and honest limits

From **The Boy Mechanic, Volume 1**, edited by H. H. Windsor, Popular Mechanics, Chicago, 1913 (Project Gutenberg #12655), "Homemade Shoe Rack", contributed by Guy H. Harvey of Mill Valley, California. The board sizes, pocket sizes and six partitions are the book's; the wood, nails, slat sizes and hanging screws are ours.

Матеріали

4

Необхідні інструменти

7

За цим кресленням виготовляють

Пов'язані креслення

Ці креслення діляться знаннями — техніки, матеріали або принципи

CC0 Суспільне надбання

Це креслення випущено під ліцензією CC0. Ви можете вільно копіювати, змінювати, поширювати та використовувати цю роботу для будь-яких цілей без запиту дозволу.

Підтримайте мейкера, купуючи продукти через його креслення, де він отримує Комісію мейкера встановлену вендорами, або створіть нову ітерацію цього креслення та включіть його як зв'язок у власне креслення для розподілу доходу.

Обговорення

(0)

Увійти щоб приєднатися до обговорення

Завантаження коментарів...