Співпраця
МИСТЕЦТВО
КРАСА ТА ЗДОРОВ'Я
РЕМЕСЛО
КУЛЬТУРА ТА ІСТОРІЯ
РОЗВАГИ
СЕРЕДОВИЩЕ
ЇЖА ТА НАПІЇ
ЗБОРНА ІНЖЕНЕРІЯ
НАУК
СПОРТ
ТЕХНОЛОГІЯ
НОСИМО
Brass Faucet Water Aspirator for Fast Vacuum Filtering (Boy Mechanic, 1915)
Charlie

Створено

Charlie

14. листопад 2026DE
7
0
0
0
0

Brass Faucet Water Aspirator for Fast Vacuum Filtering (Boy Mechanic, 1915)

A water-jet vacuum pump that screws onto a tap: water rushing down a 3/4 in brass tube past a deflector plate sucks air through a 1/4 in side tube, pulling a vacuum in a corked bottle so liquids filter through the funnel far faster.
Середній
Two hours

Інструкції

1

Read the Boy Mechanic

"Turn on the faucet, and it will be found that the time required to filter any liquid will be greatly reduced."
2

Cut the tubes

Cut brass tube 7 in long and 3/4 in outside, and another 3 in long and 1/4 in outside. Drill a hole in the side of the large tube about 3 in from one end so the small tube fits it very tightly.

Матеріали для цього кроку:

Латунна трубкаЛатунна трубка1 штука

Необхідні інструменти ({count})

Ножівка по металуНожівка по металу
Ручний дрильРучний дриль
3

Fit the deflector

Saw a slot diagonally across the large tube from one side to the centre (A) and fit a piece of sheet brass tightly in it, placed so the small tube empties directly against it. Solder the plate and the small tube in.

Матеріали для цього кроку:

Латунний листЛатунний лист1 штука
Олов'яно-свинцевий припійОлов'яно-свинцевий припій1 штука

Необхідні інструменти ({count})

Ножівка по металуНожівка по металу
ПаяльникПаяльник
4

Fit to the tap

Thread the upper end of the large tube inside to screw onto the faucet, or solder on a garden-hose style coupling.

Матеріали для цього кроку:

Олов'яно-свинцевий припійОлов'яно-свинцевий припій1 штука

Необхідні інструменти ({count})

Набір мітчиків і плашокНабір мітчиків і плашок
ПаяльникПаяльник
5

Set up the filter

Seal a glass tube and the filter funnel into the cork of a large bottle with melted paraffin. Join the small brass tube to the glass tube with rubber hose. Fold the filter paper so it sticks tight to the funnel.

Матеріали для цього кроку:

Скляні бутлі з коркамиСкляні бутлі з корками1 штука
КоркиКорки1 штука
Скляна трубкаСкляна трубка1 штука
Скляна лійка з трубкоюСкляна лійка з трубкою1 штука
ПарафінПарафін1 штука
Гумовий шлангГумовий шланг1 штука
Фільтрувальний папірФільтрувальний папір1 штука
6

Use

Turn on the tap moderately: too much water makes the suction strong enough to puncture the filter paper.
7

Troubleshooting

Aspirator troubleshooting.

Flow

Loading...
8

History and honest limits

From **The Boy Mechanic, Book 2** (Popular Mechanics, 1915), pp. 146-147 (checked on the archive.org scan boymechanicbook200chic2). The trap-bottle and implosion notes are ours.

Матеріали

10

Необхідні інструменти

4

За цим кресленням виготовляють

Пов'язані креслення

Ці креслення діляться знаннями — техніки, матеріали або принципи

CC0 Суспільне надбання

Це креслення випущено під ліцензією CC0. Ви можете вільно копіювати, змінювати, поширювати та використовувати цю роботу для будь-яких цілей без запиту дозволу.

Підтримайте мейкера, купуючи продукти через його креслення, де він отримує Комісію мейкера встановлену вендорами, або створіть нову ітерацію цього креслення та включіть його як зв'язок у власне креслення для розподілу доходу.

Обговорення

(0)

Увійти щоб приєднатися до обговорення

Завантаження коментарів...