Співпраця
МИСТЕЦТВО
КРАСА ТА ЗДОРОВ'Я
РЕМЕСЛО
КУЛЬТУРА ТА ІСТОРІЯ
РОЗВАГИ
СЕРЕДОВИЩЕ
ЇЖА ТА НАПІЇ
ЗБОРНА ІНЖЕНЕРІЯ
НАУК
СПОРТ
ТЕХНОЛОГІЯ
НОСИМО
Carbon as Pure Graphite: Coke and Sand Heated round a Coke Core in an Electric Furnace (Acheson, US 568,323)
Charlie

Створено

Charlie

1. листопад 2026DE
10
0
0
0
0

Carbon as Pure Graphite: Coke and Sand Heated round a Coke Core in an Electric Furnace (Acheson, US 568,323)

Acheson found that carbon heated on its own hardly turns to graphite, but carbon first bound to silicon does. Coke and sand packed round a coke core form silicon carbide when the current heats the core; hotter still, the silicon boils away and the carbon is left as pure graphite, which grows outward as the core. Result: pure carbon in its graphite form, sorted like native graphite. Source: E. G. Acheson, US patent 568,323 (1896), pp. 1-3 and drawing (shown above). The furnace runs at hundreds of volts and up to 1000 amperes.
Просунутий
2 days

Інструкції

1

Mix the charge

Grind and mix powdered coke, sand, salt and sawdust thoroughly, the coke about half the weight (50 parts coke to 50 parts silica and other materials).

Матеріали для цього кроку:

Металургійний коксМеталургійний кокс50 parts

Необхідні інструменти ({count})

ПісокПісок
Хлорид натрію (сіль)Хлорид натрію (сіль)
ТирсаТирса
Ступка з товкачикомСтупка з товкачиком
2

Build the furnace

Build a furnace of firebrick with carbon electrodes through the two end walls. Lay a core of granular coke between the electrodes (Acheson's was 7 ft long by 4 in wide) and pack the mixture all round it.

Матеріали для цього кроку:

Металургійний коксМеталургійний кокс1 granular, for the core

Необхідні інструменти ({count})

Вогнетривка цеглаВогнетривка цегла
Графітовий електродГрафітовий електрод
3

Run the current

Turn on the current, at first about 650 V and 50 A. The core heats, and silicon carbide forms round it; as the heat rises further the carbide breaks up, silicon goes off as vapour and graphite is left, carrying more current. Near the end it is about 100 V and 1000 A. Stop before the graphite reaches the walls. Ours: a step-down transformer as the supply.

Необхідні інструменти ({count})

Знижувальний трансформаторЗнижувальний трансформатор
Графітовий електродГрафітовий електрод
4

Take out the graphite

When cool, separate the graphite from the core and the unchanged mixture, and grade it like native graphite.

Необхідні інструменти ({count})

Ступка з товкачикомСтупка з товкачиком

Матеріали

1

Необхідні інструменти

7

За цим кресленням виготовляють

CC0 Суспільне надбання

Це креслення випущено під ліцензією CC0. Ви можете вільно копіювати, змінювати, поширювати та використовувати цю роботу для будь-яких цілей без запиту дозволу.

Підтримайте мейкера, купуючи продукти через його креслення, де він отримує Комісію мейкера встановлену вендорами, або створіть нову ітерацію цього креслення та включіть його як зв'язок у власне креслення для розподілу доходу.

Обговорення

(0)

Увійти щоб приєднатися до обговорення

Завантаження коментарів...