Співпраця
МИСТЕЦТВО
КРАСА ТА ЗДОРОВ'Я
РЕМЕСЛО
КУЛЬТУРА ТА ІСТОРІЯ
РОЗВАГИ
СЕРЕДОВИЩЕ
ЇЖА ТА НАПІЇ
ЗБОРНА ІНЖЕНЕРІЯ
НАУК
СПОРТ
ТЕХНОЛОГІЯ
НОСИМО

Clear Laminating Film: Polyvinyl Butyral Plasticised with Tributyl Citrate and Extruded (Nason, Monsanto, US 2,126,028)
The clear layer inside safety glass must stay rubbery from frost to summer heat and stick to glass on its own. Nason softened polyvinyl butyral with tributyl citrate, which stays in the film far better than the usual phthalate.
Result: a clear, rubbery, non-tacky film that bonds glass under heat and pressure without glue.
Source: Nason, US 2,126,028 (Monsanto, 1938). He used Butvar resin; ours is the polyvinyl butyral we make. Not given: film thickness. Picture drawn by Youblob.
Середній
1 day
Інструкції
1
1
Weigh resin and plasticiser
Weigh resin and plasticiser
Take 100 parts of polyvinyl butyral resin and 50 parts of tributyl citrate (Nason: 50 or more parts mix freely).
Матеріали для цього кроку:
Полівінілбутиральна смола100 parts
Трибутилцитрат50 partsНеобхідні інструменти ({count})
Важільні терези2
2
Mix with slight warming
Mix with slight warming
Work them together with slight warming in a mixer (or dissolve both in acetone and let it evaporate) until the mass is even.
Необхідні інструменти ({count})
Змішувальна ємність
Електроплитка3
3
Extrude into sheet
Extrude into sheet
Sheet the plasticised resin, for example by extrusion under pressure. Ours: a plastic extruder with a slot die. Thickness: not given.
Необхідні інструменти ({count})
Екструдер для пластику
Екструзійна матриця4
4
Check the film
Check the film
The film should be clear, moderately soft and rubbery, but not tacky. Pressed hot between glass sheets it bonds without adhesive.
Необхідні інструменти ({count})
ЕлектроплиткаМатеріали
2- 100 partsЗаповнювач
- 50 partsЗаповнювач
Необхідні інструменти
5- Заповнювач
- Заповнювач
- Заповнювач
- Заповнювач
- Заповнювач
За цим кресленням виготовляють
CC0 Суспільне надбання
Це креслення випущено під ліцензією CC0. Ви можете вільно копіювати, змінювати, поширювати та використовувати цю роботу для будь-яких цілей без запиту дозволу.
Підтримайте мейкера, купуючи продукти через його креслення, де він отримує Комісію мейкера встановлену вендорами, або створіть нову ітерацію цього креслення та включіть його як зв'язок у власне креслення для розподілу доходу.
