Співпраця
МИСТЕЦТВО
КРАСА ТА ЗДОРОВ'Я
РЕМЕСЛО
КУЛЬТУРА ТА ІСТОРІЯ
РОЗВАГИ
СЕРЕДОВИЩЕ
ЇЖА ТА НАПІЇ
ЗБОРНА ІНЖЕНЕРІЯ
НАУК
СПОРТ
ТЕХНОЛОГІЯ
НОСИМО
Copper Matte: Hot Calcines Smelted to 50 % Matte in Butte Reverberatories (Peters 1905)
Charlie

Створено

Charlie

1. листопад 2026DE
9
0
0
0
0

Copper Matte: Hot Calcines Smelted to 50 % Matte in Butte Reverberatories (Peters 1905)

In a coal-fired reverberatory at Butte the hot calcines were melted down into a light siliceous slag, skimmed off, and a heavy copper matte, tapped into moulds for the converters. Result: matte of above 50 % copper, nearly 30 % of the weight of the charge; about 50 tons of charge a day per furnace. Source: Edward D. Peters, Modern Copper Smelting (1905), pp. 451-452, 470, 474. Not given: the exact flux ratio, the tapping interval. Picture drawn by Youblob.
Просунутий
1 day

Інструкції

1

Make up the charge

The charge is mostly hot calcined pyritic concentrates of 10 to 22 % copper (usually about 15 %); 50 to 80 % of it is often hot calcines straight from the calciners. Dry siliceous silver ore is often added to give a slag of 30 to 45 % silica.

Матеріали для цього кроку:

Випалений мідний концентратВипалений мідний концентрат5 tons per charge
2

Smelt in the reverberatory

Drop the charge onto the hearth of a reverberatory furnace, inside about 20 ft 6 in by 12 ft 10 in with a 6 by 6 ft fire-box, and work off each 5-ton charge in 2 1/2 hours. Burn coal fast, about 10 tons a day, for about 50 tons of charge a day.

Необхідні інструменти ({count})

Відбивна пічВідбивна піч
Кам'яне вугілля бітумінознеКам'яне вугілля бітумінозне
Залізні грабліЗалізні граблі
3

Skim the slag

Skim off the light slag at the side doors, leaving the heavy matte on the hearth.

Необхідні інструменти ({count})

Залізні грабліЗалізні граблі
4

Tap the matte

Tap the matte into cast-iron or steel moulds. Aim at above 50 % copper: about 3 1/2 tons of charge (at some works 2 1/2) make 1 ton of matte.

Необхідні інструменти ({count})

ВиливницяВиливниця

Матеріали

1

Необхідні інструменти

4

За цим кресленням виготовляють

Пов'язані креслення

Ці креслення діляться знаннями — техніки, матеріали або принципи

CC0 Суспільне надбання

Це креслення випущено під ліцензією CC0. Ви можете вільно копіювати, змінювати, поширювати та використовувати цю роботу для будь-яких цілей без запиту дозволу.

Підтримайте мейкера, купуючи продукти через його креслення, де він отримує Комісію мейкера встановлену вендорами, або створіть нову ітерацію цього креслення та включіть його як зв'язок у власне креслення для розподілу доходу.

Обговорення

(0)

Увійти щоб приєднатися до обговорення

Завантаження коментарів...