Співпраця
МИСТЕЦТВО
КРАСА ТА ЗДОРОВ'Я
РЕМЕСЛО
КУЛЬТУРА ТА ІСТОРІЯ
РОЗВАГИ
СЕРЕДОВИЩЕ
ЇЖА ТА НАПІЇ
ЗБОРНА ІНЖЕНЕРІЯ
НАУК
СПОРТ
ТЕХНОЛОГІЯ
НОСИМО
Corrugated Cardboard and Boxes
Quill

Створено

Quill

11. жовтень 2026DE
25
0
0
0
0

Corrugated Cardboard and Boxes

Corrugated board is paper made stiff by shape. On a machine called a corrugator, a fluting paper is softened with steam and pressed between geared rolls into waves, then glued with a starch adhesive to a flat linerboard. A second liner glued to the other side makes single-wall board, which is dried over hot plates and cut into sheets. Flute sizes are lettered: C flute, about 4 mm thick, is the commonest in boxes; B is 3.2 mm, E 1.6 mm. For a box, the board is scored so it bends where wanted and slotted to make flaps, then glued at one edge, the manufacturer's joint, and shipped flat.
Просунутий
Continuous (industrial)

Інструкції

1

Load the reels

Reels of fluting medium and linerboard are mounted at the corrugator.

Матеріали для цього кроку:

Рулон паперу для гофруванняРулон паперу для гофрування1 reel
Рулон крафт-лайнераРулон крафт-лайнера2 reel

Необхідні інструменти ({count})

ГофроагрегатГофроагрегат
2

Flute

At the single-facer the medium is heated, moistened and formed into flutes on geared rolls, then glued with starch adhesive to one liner.

Матеріали для цього кроку:

Крохмальний клей для гофроагрегатуКрохмальний клей для гофроагрегату1 кг

Необхідні інструменти ({count})

ГофроагрегатГофроагрегат
3

Second liner

At the double-backer the second liner is glued to the other side of the flutes, making single-wall board.

Необхідні інструменти ({count})

ГофроагрегатГофроагрегат
4

Dry and cut

The board passes over hot plates under a weighted belt to dry, then is slit and cut into sheets.

Необхідні інструменти ({count})

ГофроагрегатГофроагрегат
5

Make boxes

Sheets are scored for the folds and slotted for the flaps, then folded and glued at the manufacturer's joint; the boxes ship flat.

Необхідні інструменти ({count})

Фальцювально-склеювальна машина для коробокФальцювально-склеювальна машина для коробок

Матеріали

3

Необхідні інструменти

2

Пов'язані креслення

Ці креслення діляться знаннями — техніки, матеріали або принципи

CC0 Суспільне надбання

Це креслення випущено під ліцензією CC0. Ви можете вільно копіювати, змінювати, поширювати та використовувати цю роботу для будь-яких цілей без запиту дозволу.

Підтримайте мейкера, купуючи продукти через його креслення, де він отримує Комісію мейкера встановлену вендорами, або створіть нову ітерацію цього креслення та включіть його як зв'язок у власне креслення для розподілу доходу.

Обговорення

(0)

Увійти щоб приєднатися до обговорення

Завантаження коментарів...