Співпраця
МИСТЕЦТВО
КРАСА ТА ЗДОРОВ'Я
РЕМЕСЛО
КУЛЬТУРА ТА ІСТОРІЯ
РОЗВАГИ
СЕРЕДОВИЩЕ
ЇЖА ТА НАПІЇ
ЗБОРНА ІНЖЕНЕРІЯ
НАУК
СПОРТ
ТЕХНОЛОГІЯ
НОСИМО
Crucible Furnace: the Brass Founder's Sunk Coke Air Furnace (Larkin, 1907)
Forge

Створено

Forge

3. листопад 2026NO
14
0
0
1
0

Crucible Furnace: the Brass Founder's Sunk Coke Air Furnace (Larkin, 1907)

The brass founder's crucible furnace: a firebrick-lined pit sunk below the floor, fired with hard coke on an iron grating over the ash-pit, closed by a dome-shaped iron cover and drawn by a flue with a damper. The crucible sits on a firebrick in the middle of the fire, lidded, with coke banked round it, until the metal is melted. Result: a coke-fired crucible furnace for melting brass and bronze. Source: J. Larkin, The Practical Brass and Iron Founder's Guide (1907), pp. 96-99. Unknown: all sizes. Picture drawn by Youblob.
Середній
Unknown

Інструкції

1

Build the pit

Sink the furnace below the floor. Line the inside with firebricks set in fireclay; use pure clay (white, opaque, oily to the touch), since iron oxide, magnesia, lime or black lead in brick or clay shortens the furnace's life. Close the ash-pit at the bottom with a hinged iron grating. Not given: sizes.

Матеріали для цього кроку:

Вогнетривка цеглаВогнетривка цегла1 lining
Вогнетривка глинаВогнетривка глина1 jointing
Невідомий металНевідомий метал1 hinged grating

Необхідні інструменти ({count})

Невідомі розміриНевідомі розміри
2

Fit the cover and flue

Make a dome-shaped cover for the furnace top of cast or wrought iron. Lead a flue from the furnace with a damper in it. Not given: the flue size or height.

Матеріали для цього кроку:

Невідомий металНевідомий метал1 dome cover, damper
Димохідна трубаДимохідна труба1 flue

Необхідні інструменти ({count})

Невідомі розміриНевідомі розміри
3

Fire it and melt

Burn hard coke broken to lumps the size of a fist. Heat the crucible bottom upwards in the fire, lift it out with the tongs, turn it upright and bed it on a slab of fireclay or a firebrick, put on its lid and bank the fire round it. Put the metal in, close the cover and open the damper for draught until the metal is melted. Black-lead crucibles last longer; clay ones must first be hardened by slowly raising their temperature.

Необхідні інструменти ({count})

Металургійний коксМеталургійний кокс
Графітошамотний тигельГрафітошамотний тигель
Кліщі для тиглівКліщі для тиглів

Матеріали

4

Необхідні інструменти

4

За цим кресленням виготовляють

CC0 Суспільне надбання

Це креслення випущено під ліцензією CC0. Ви можете вільно копіювати, змінювати, поширювати та використовувати цю роботу для будь-яких цілей без запиту дозволу.

Підтримайте мейкера, купуючи продукти через його креслення, де він отримує Комісію мейкера встановлену вендорами, або створіть нову ітерацію цього креслення та включіть його як зв'язок у власне креслення для розподілу доходу.

Обговорення

(0)

Увійти щоб приєднатися до обговорення

Завантаження коментарів...