Співпраця
МИСТЕЦТВО
КРАСА ТА ЗДОРОВ'Я
РЕМЕСЛО
КУЛЬТУРА ТА ІСТОРІЯ
РОЗВАГИ
СЕРЕДОВИЩЕ
ЇЖА ТА НАПІЇ
ЗБОРНА ІНЖЕНЕРІЯ
НАУК
СПОРТ
ТЕХНОЛОГІЯ
НОСИМО

Dust Mask: Rigid Perforated Guard with a Replaceable Cloth Filter (Swindell, US 2,681,060, 1954)
A simple dust mask for workshops and plants. A rigid cup with air holes covers the nose and mouth. A cloth filter lines the inside and folds over the cup's rim, held by wire clips: the air passes through the cloth, and the cloth also pads the rim against the face. Change the cloth and the same mask can pass from worker to worker.
Result: a nose-and-mouth dust mask with a filter you can replace.
Source: M. E. Swindell, US 2,681,060 (1954). Unknown: sizes, how the cup is formed, the cloth. Picture: the patent drawing.
Початківець
Unknown
Інструкції
1
1
Make the guard
Make the guard
Make a rigid cup to cover the nose and mouth, of composition rubber, plastic, metal or another suitable material. Give it a narrow upright bulge at the front for the nose. Shape its edge to the face so it fits close at the bridge of the nose and the chin, and turn the whole edge outward as a curved lip. Make air holes in both the nose bulge and the mouth part. Not given: sizes, the number of holes, how it is formed.
Матеріали для цього кроку:
Невідомий матеріал1 guardНеобхідні інструменти ({count})
Ручний дриль
Невідомі розміри2
2
Fit the filter clips
Fit the filter clips
Bend several clips of springy wire and rivet them to the guard near its edge, so each can press down on the back of the lip. Ours: spring steel wire. Not given: how many clips.
Матеріали для цього кроку:
Пружинний сталевий дріт1 clips
Невідомий метал1 rivetsНеобхідні інструменти ({count})
Круглогубці
Клепальний набір3
3
Make the head strap
Make the head strap
Cut an elastic strap to go round the head and fit a hook at each end. The hooks catch in a pair of the guard's air holes. Not given: the length, the hook metal.
Матеріали для цього кроку:
Еластичний шнур1 strap
Невідомий метал1 two hooksНеобхідні інструменти ({count})
Ножиці
Круглогубці4
4
Fit the filter and wear it
Fit the filter and wear it
Lay a cup-shaped cloth filter in the hollow of the guard. Fold its edges over the lip and clamp them to the back of the lip with the clips. The cloth leaves an air space in front of the face and one between itself and the guard, and it pads the lip where it touches the face. Hook the strap into the holes and put the mask over the nose and mouth. Replace the cloth when it is used, or before the mask passes to another wearer. Not given: the cloth.
Матеріали для цього кроку:
Невідома тканина1 filterНеобхідні інструменти ({count})
НожиціМатеріали
5- 1 guardЗаповнювач
- 1 clipsЗаповнювач
- 1 two hooksЗаповнювач
- 1 strapЗаповнювач
- 1 filterЗаповнювач
Необхідні інструменти
5- Заповнювач
- Заповнювач
- Заповнювач
- Заповнювач
- Заповнювач
Матеріали з пов'язаних креслень
За цим кресленням виготовляють
Пов'язані креслення
Ці креслення діляться знаннями — техніки, матеріали або принципи
CC0 Суспільне надбання
Це креслення випущено під ліцензією CC0. Ви можете вільно копіювати, змінювати, поширювати та використовувати цю роботу для будь-яких цілей без запиту дозволу.
Підтримайте мейкера, купуючи продукти через його креслення, де він отримує Комісію мейкера встановлену вендорами, або створіть нову ітерацію цього креслення та включіть його як зв'язок у власне креслення для розподілу доходу.




