Співпраця
МИСТЕЦТВО
КРАСА ТА ЗДОРОВ'Я
РЕМЕСЛО
КУЛЬТУРА ТА ІСТОРІЯ
РОЗВАГИ
СЕРЕДОВИЩЕ
ЇЖА ТА НАПІЇ
ЗБОРНА ІНЖЕНЕРІЯ
НАУК
СПОРТ
ТЕХНОЛОГІЯ
НОСИМО

Forge-Welded Plough and Trace Chain: Links Bent, Scarfed and Welded One into the Next, with S-Hooks and a Swivel (Edwinson, 1886)
How a country smith made and mended farm chain, from George Edwinson's series in Amateur Work (1886): rod cut to link length plus one-third, bent hot, scarfed and forge-welded shut through the previous link; tough S-hooks for field repairs and a forged swivel link with its pin.
Середній
A few minutes per link
Інструкції
1
1
His rules
His rules
Завантаження блокнота Jupyter…
2
2
Read Edwinson
Read Edwinson
"Measure the length of a link in the chain, add one-third to this, and the total will give the required length of iron for an oval link."
3
3
Cut the stock
Cut the stock
For an oval link cut rod the link length plus one-third; for a round link a little over three times its diameter. Nick the lengths off the rod (his fig. 163).
Матеріали для цього кроку:
Пруток із кованого заліза1 штукаНеобхідні інструменти ({count})
Гаряче зубило (ковальська рубка)
Ковадло
Молоток4
4
Bend and scarf
Bend and scarf
Heat the middle of a piece red, bend it into a U (fig. 164), and scarf both ends (fig. 165).
Необхідні інструменти ({count})
Кувальне горно
Ковадло
Молоток
Ковальські кліщі5
5
Weld the links
Weld the links
Thread the open link through the last finished link, bring it to a welding heat, close it up and weld it shut. Repeat link by link.
Матеріали для цього кроку:
Пісок1 штукаНеобхідні інструменти ({count})
Кувальне горно
Ковадло
Молоток
Ковальські кліщі6
6
S-hooks for repairs
S-hooks for repairs
Bend S-hooks (fig. 166) from tough iron and cool them slowly. A broken chain is mended in the field by bending the hook ends over the broken links (fig. 167).
Матеріали для цього кроку:
Пруток із кованого заліза1 штукаНеобхідні інструменти ({count})
Кувальне горно
Ковадло
Молоток7
7
Swivel link
Swivel link
Cut iron as for a round link, double it (fig. 168), form it over the beck of the anvil (169), weld the ends together and draw them out (170), then form, bend over and scarf (171). Forge the swivel pin (172), set it in the swivel's boss, weld up the eye and finish (173).
Матеріали для цього кроку:
Пруток із кованого заліза1 штукаНеобхідні інструменти ({count})
Кувальне горно
Ковадло
Молоток
Ковальські кліщі8
8
Troubleshooting
Troubleshooting
Chain troubleshooting.
Flow
Loading...
9
9
History and honest limits
History and honest limits
From George Edwinson, "Smithing and Forging" VIII, **Amateur Work, Illustrated**, vol. VI (1886-87), p. 83 and figs. 162-175 on p. 80 (checked on the archive.org scan amateurworkillus06lond). He gives no rod size for plough chain; the notebook link sizes, metric figures and tools are ours.
За цим кресленням виготовляють
Пов'язані креслення
Ці креслення діляться знаннями — техніки, матеріали або принципи
CC0 Суспільне надбання
Це креслення випущено під ліцензією CC0. Ви можете вільно копіювати, змінювати, поширювати та використовувати цю роботу для будь-яких цілей без запиту дозволу.
Підтримайте мейкера, купуючи продукти через його креслення, де він отримує Комісію мейкера встановлену вендорами, або створіть нову ітерацію цього креслення та включіть його як зв'язок у власне креслення для розподілу доходу.


