Співпраця
МИСТЕЦТВО
КРАСА ТА ЗДОРОВ'Я
РЕМЕСЛО
КУЛЬТУРА ТА ІСТОРІЯ
РОЗВАГИ
СЕРЕДОВИЩЕ
ЇЖА ТА НАПІЇ
ЗБОРНА ІНЖЕНЕРІЯ
НАУК
СПОРТ
ТЕХНОЛОГІЯ
НОСИМО

Claw Crowbar: a Round Iron Bar with Steeled Chisel Ends, One Split Hot and Bent into a Claw (Edwinson, 1886)
The builder's and fencer's crowbar from George Edwinson's smithing series (Amateur Work, 1886): a round iron bar 2 to 5 ft long with steel-pointed ends, one forged to a chisel, the other split hot into a fork and bent over into a nail-drawing claw, tempered purple.
Середній
Half a day at the forge
Інструкції
1
1
His sizes
His sizes
Завантаження блокнота Jupyter…
2
2
Read Edwinson
Read Edwinson
"It is an ordinary round bar of iron with steel-pointed ends."
3
3
Choose the bar
Choose the bar
Take round bar iron of 1, 1 1/4 or 1 1/2 in (25, 32 or 38 mm), 2 to 5 ft (0.6-1.5 m) long. A bar of best tool steel may be lighter.
Матеріали для цього кроку:
Пруток кованого заліза1 штукаНеобхідні інструменти ({count})
Гаряче зубило (ковальська рубка)4
4
Steel the ends (ours, after his pick method)
Steel the ends (ours, after his pick method)
Split each end hot, weld a steel wedge into the cleft under borax and draw it out, as for a pick point.
Матеріали для цього кроку:
Тигельна сталь1 штука
Порошок бури1 штукаНеобхідні інструменти ({count})
Кувальне горно
Гаряче зубило (ковальська рубка)
Ковадло
Кувалда
Ковальські кліщі5
5
Forge the chisel end
Forge the chisel end
Forge one end to a chisel shape. Keep the steel no hotter than red and hammer it lightly at that heat.
Необхідні інструменти ({count})
Кувальне горно
Ковадло
Молоток
Ковальські кліщі6
6
Forge the claw
Forge the claw
Forge the other end to a chisel shape too, split it hot into a fork with the hot chisel, and bend the fork over to form the claw. For a quarryman's bar leave out the claw and bend one chisel end over as a short lever.
Необхідні інструменти ({count})
Кувальне горно
Гаряче зубило (ковальська рубка)
Ковадло
Молоток
Ковальські кліщі7
7
Harden and temper
Harden and temper
Harden the steeled ends and temper them to a purple, the best tint for crowbars.
Необхідні інструменти ({count})
Кувальне горно
Гартівна діжка8
8
Troubleshooting
Troubleshooting
Crowbar troubleshooting.
Flow
Loading...
9
9
History and honest limits
History and honest limits
From George Edwinson, "Smithing and Forging" (part X), **Amateur Work, Illustrated**, vol. VI (Ward, Lock & Co., 1886-87), pp. 211-214 (checked on the archive.org scan amateurworkillus06lond), p. 212 and fig. 220. The steel wedges follow his pick method; the metric figures and tools are ours.
Матеріали
3- 1 штукаЗаповнювач
- 1 штукаЗаповнювач
- 1 штукаЗаповнювач
За цим кресленням виготовляють
Пов'язані креслення
Ці креслення діляться знаннями — техніки, матеріали або принципи
CC0 Суспільне надбання
Це креслення випущено під ліцензією CC0. Ви можете вільно копіювати, змінювати, поширювати та використовувати цю роботу для будь-яких цілей без запиту дозволу.
Підтримайте мейкера, купуючи продукти через його креслення, де він отримує Комісію мейкера встановлену вендорами, або створіть нову ітерацію цього креслення та включіть його як зв'язок у власне креслення для розподілу доходу.


