Співпраця
МИСТЕЦТВО
КРАСА ТА ЗДОРОВ'Я
РЕМЕСЛО
КУЛЬТУРА ТА ІСТОРІЯ
РОЗВАГИ
СЕРЕДОВИЩЕ
ЇЖА ТА НАПІЇ
ЗБОРНА ІНЖЕНЕРІЯ
НАУК
СПОРТ
ТЕХНОЛОГІЯ
НОСИМО

Refractory Cement: Clay, Iron Filings and Manganese, Fired Hard (Spon's Workshop Receipts)
A fireproof and waterproof cement from Spon's Workshop Receipts: dried clay, clean iron filings, peroxide of manganese, sea salt and borax, ground fine, wetted to a thick paste, applied at once and then heated slowly almost to white heat.
Fired, it is very hard and stands both red heat and boiling water.
Source: Spon, Workshop Receipts, first series, p. 24. Picture: the recipe.
Початківець
Unknown
Інструкції
1
1
Dry and powder the clay
Dry and powder the clay
Dry 4 or 5 parts of clay thoroughly and pulverize it.
Матеріали для цього кроку:
Сира глина з покладу1 4 or 5 partsНеобхідні інструменти ({count})
Ступка з товкачиком2
2
Mix the powders
Mix the powders
Add 2 parts of fine iron filings free from oxide, 1 part of peroxide of manganese, 1/2 part of sea salt and 1/2 part of borax. Mingle them thoroughly and make the mixture as fine as possible.
Матеріали для цього кроку:
Залізна тирса1 2 parts, fine, free from oxide
Діоксид мангану (піролюзит)1 1 part
Крупна морська сіль1 1/2 part
Порошок бури1 1/2 partНеобхідні інструменти ({count})
Ступка з товкачиком3
3
Make the paste, apply and fire
Make the paste, apply and fire
Work the powder into a thick paste with as much water as it needs, mixing thoroughly. Use it at once. After applying it, heat it gradually, almost to a white heat.
Матеріали для цього кроку:
Вода1 штукаНеобхідні інструменти ({count})
Ступка з товкачикомМатеріали
6- 1 4 or 5 partsЗаповнювач
- 1 2 parts, fine, free from oxideЗаповнювач
- 1 1 partЗаповнювач
- 1 1/2 partЗаповнювач
- 1 1/2 partЗаповнювач
- 1 штукаЗаповнювач
Матеріали з пов'язаних креслень
За цим кресленням виготовляють
CC0 Суспільне надбання
Це креслення випущено під ліцензією CC0. Ви можете вільно копіювати, змінювати, поширювати та використовувати цю роботу для будь-яких цілей без запиту дозволу.
Підтримайте мейкера, купуючи продукти через його креслення, де він отримує Комісію мейкера встановлену вендорами, або створіть нову ітерацію цього креслення та включіть його як зв'язок у власне креслення для розподілу доходу.

