Співпраця
МИСТЕЦТВО
КРАСА ТА ЗДОРОВ'Я
РЕМЕСЛО
КУЛЬТУРА ТА ІСТОРІЯ
РОЗВАГИ
СЕРЕДОВИЩЕ
ЇЖА ТА НАПІЇ
ЗБОРНА ІНЖЕНЕРІЯ
НАУК
СПОРТ
ТЕХНОЛОГІЯ
НОСИМО
Glass Wool: Steam-Blown from an Electrically Reheated Glass Stream (Slayter, US 2,133,235)
Charlie

Створено

Charlie

4. листопад 2026DE
10
0
0
0
0

Glass Wool: Steam-Blown from an Electrically Reheated Glass Stream (Slayter, US 2,133,235)

Very fine glass wool needs very hot glass at the blower, but a stream loses heat on its way out of the furnace. Games Slayter of Owens-Illinois (filed 1933, US 2,133,235) reheated the stream as it left: it runs through a silicon-carbide element lined with platinum, then a steam blast draws it into fine filaments, which a conveyor carries under a roll that presses them into a loose mat. Not given: the glass, any temperature, the current, the steam pressure and the sizes. Source: G. Slayter, US 2,133,235 (1938), Figs. 1-4. Picture: his Fig. 1.
Просунутий
Continuous (industrial)

Інструкції

1

Melt and refine the glass

Melt and refine the glass in the furnace's tank, which feeds the forehearth continuously.

Матеріали для цього кроку:

Невідоме склоНевідоме скло1 continuous feed

Необхідні інструменти ({count})

Скловарна пічСкловарна піч
2

Feed it to the bushing

The refined glass flows along the forehearth, an extension of the furnace, to a well in its floor. A refractory bushing is held under the well by a ring. Raise or lower the refractory plug in the glass above the bushing to set the flow.

Необхідні інструменти ({count})

Живильник (передпіч)Живильник (передпіч)
Термостійкі рукавиціТермостійкі рукавиці
3

Reheat the stream

The bushing carries a silicon-carbide element (Slayter used "Globars") with a hole through its middle and an arm on each side, cabled to terminals. A layer of platinum spun onto the inner surface keeps the glass off the element. Pass current through the element and the platinum: the glass is heated again as it runs through the hole, so it reaches the blower hot enough to blow very fine wool without overheating the forehearth.

Необхідні інструменти ({count})

Фільєра з нагрівом карбідом кремніюФільєра з нагрівом карбідом кремнію
Знижувальний трансформаторЗнижувальний трансформатор
4

Blow it into filaments

Let the stream fall through a steam blower fed with steam by a pipe. The blast draws the glass out into fine filaments.

Необхідні інструменти ({count})

Паровий дуттьовий апаратПаровий дуттьовий апарат
Паровий котелПаровий котел
Захисні окуляриЗахисні окуляри
5

Collect a loose mat

The filaments gather on a conveyor, which carries them under a roll that presses the wool into a loose mat.

Необхідні інструменти ({count})

Промисловий стрічковий конвеєрПромисловий стрічковий конвеєр
Притискний валПритискний вал

Матеріали

1

Необхідні інструменти

10

За цим кресленням виготовляють

CC0 Суспільне надбання

Це креслення випущено під ліцензією CC0. Ви можете вільно копіювати, змінювати, поширювати та використовувати цю роботу для будь-яких цілей без запиту дозволу.

Підтримайте мейкера, купуючи продукти через його креслення, де він отримує Комісію мейкера встановлену вендорами, або створіть нову ітерацію цього креслення та включіть його як зв'язок у власне креслення для розподілу доходу.

Обговорення

(0)

Увійти щоб приєднатися до обговорення

Завантаження коментарів...