Співпраця
МИСТЕЦТВО
КРАСА ТА ЗДОРОВ'Я
РЕМЕСЛО
КУЛЬТУРА ТА ІСТОРІЯ
РОЗВАГИ
СЕРЕДОВИЩЕ
ЇЖА ТА НАПІЇ
ЗБОРНА ІНЖЕНЕРІЯ
НАУК
СПОРТ
ТЕХНОЛОГІЯ
НОСИМО

Flower Holder for a Vase: Crossed Brass Strips Carrying Slit Spring Cones That Grip Each Stem (Green, 1903)
Francis W. Green of Brooklyn received US 720,132, dated 10 February 1903, for a holder that sits on the mouth of a vase and holds each flower separately, at the height you choose. Metal strips cross at the centre and hook over the rim; small cones of sheet metal, slit at the bottom, hang in holes along the strips and grip each stem like a spring, so a bunch can be arranged "as may suit the individual taste of the user".
We make it from brass. All sizes are ours.
Початківець
About 3 hours
Інструкції
1
1
Cone blank
Cone blank
Завантаження блокнота Jupyter…
2
2
Read US 720,132
Read US 720,132
"The stems of the sprays or flowers may be inserted and forced downward through the conical holder until the head of the flower or spray is at the desired position in the holder."
3
3
Make the frame
Make the frame
Cut four brass strips a little longer than your vase's mouth is wide. Drill each at its centre and rivet all four together crossed at equal angles with a short piece of brass tube flared at both ends, his hollow rivet 2. Bend the ends down to make ears that rest over the rim of the vase.
Матеріали для цього кроку:
Латунна смуга1 штука
Латунна трубка1 штукаНеобхідні інструменти ({count})
Ножівка по металу
Свердлильний верстат
Набір свердел
Кернер
Слюсарний молоток із кульковим бойком
Плоскогубці
Слюсарні лещата4
4
Punch the holes
Punch the holes
Drill holes along each strip, spaced so the flowers will stand apart, just big enough for a cone's narrow part to pass and its lip to rest on the strip.
Необхідні інструменти ({count})
Свердлильний верстат
Набір свердел
Набір напилків5
5
Make the cones
Make the cones
Mark the notebook's blank on brass sheet, cut it out, roll it round a tapered rod or nail into a cone small end down, overlap the seam and solder it. Turn the wide end out into a small lip 6. Slit the narrow end up a short way with a saw so it springs.
Матеріали для цього кроку:
Латунний лист1 штука
Олов'яно-свинцевий припій1 штука
Флюс1 штукаНеобхідні інструменти ({count})
Ножиці по металу
Круглогубці
Електричний паяльник
Ювелірний лобзик
Набір напилків6
6
Fit the cones
Fit the cones
Drop a cone into each hole and solder its lip to the strip, or make the hole a little small and press the cone in until the lip sits on the strip, as he allows.
Матеріали для цього кроку:
Олов'яно-свинцевий припій1 штука
Флюс1 штукаНеобхідні інструменти ({count})
Електричний паяльник
Плоскогубці7
7
Arrange flowers
Arrange flowers
Set the frame on the vase. Push each stem down through a cone until the flower is at the height you want: the slit end grips it. Lift a flower out and put another in without disturbing the rest.
8
8
Troubleshooting
Troubleshooting
Flower holder troubleshooting.
Flow
Loading...
9
9
History and honest limits
History and honest limits
**Francis W. Green** of Brooklyn, US 720,132, dated 10 February 1903, filed 28 November 1902. He claimed "a frame adapted to rest over the mouth of a vase or other receptacle and provided with a number of vertically-disposed tapering spring flower-holders open at both ends". Not built: his adjustable frame ends (Fig. 6). He gives no sizes and does not limit the material: brass, all sizes and the solder are ours.
Матеріали
5- 1 штукаЗаповнювач
- 1 штукаЗаповнювач
- 1 штукаЗаповнювач
- Заповнювач
- 2 штукЗаповнювач
Необхідні інструменти
12- Заповнювач
- Заповнювач
- Заповнювач
- Заповнювач
- Заповнювач
- Заповнювач
- Заповнювач
- Заповнювач
- Заповнювач
- Заповнювач
- Заповнювач
- Заповнювач
За цим кресленням виготовляють
Пов'язані креслення
Ці креслення діляться знаннями — техніки, матеріали або принципи
CC0 Суспільне надбання
Це креслення випущено під ліцензією CC0. Ви можете вільно копіювати, змінювати, поширювати та використовувати цю роботу для будь-яких цілей без запиту дозволу.
Підтримайте мейкера, купуючи продукти через його креслення, де він отримує Комісію мейкера встановлену вендорами, або створіть нову ітерацію цього креслення та включіть його як зв'язок у власне креслення для розподілу доходу.


