Співпраця
МИСТЕЦТВО
КРАСА ТА ЗДОРОВ'Я
РЕМЕСЛО
КУЛЬТУРА ТА ІСТОРІЯ
РОЗВАГИ
СЕРЕДОВИЩЕ
ЇЖА ТА НАПІЇ
ЗБОРНА ІНЖЕНЕРІЯ
НАУК
СПОРТ
ТЕХНОЛОГІЯ
НОСИМО
Hafnium: Iodide Vapour Split on a Tungsten Wire Heated beyond 1600 °C (van Arkel and de Boer, US 1,671,213)
Charlie

Створено

Charlie

1. листопад 2026DE
7
0
0
0
0

Hafnium: Iodide Vapour Split on a Tungsten Wire Heated beyond 1600 °C (van Arkel and de Boer, US 1,671,213)

Hafnium will not come out of its chloride and hydrogen as clean metal. Van Arkel and de Boer instead let the vapour of hafnium iodide pass a white-hot wire in an evacuated vessel: the iodide splits and pure hafnium grows on the wire. Result: hafnium metal deposited on the wire. Source: A. E. van Arkel and J. H. de Boer, US 1,671,213 (1928). The wire runs white-hot; iodine vapour is released. Picture: the patent drawing.
Просунутий
1 day

Інструкції

1

Set up the vessel and wire

Hang a wire, for example of tungsten, inside the vessel, fixed with small screws to two leading-in wires sealed through its narrowed top. A side tube goes to a pump. For the high temperatures the iodides need, the patent advises a vessel of suitable metal such as chrome iron rather than glass.

Необхідні інструменти ({count})

Скляна посудинаСкляна посудина
Вольфрамовий дрітВольфрамовий дріт
Джерело живлення постійного струмуДжерело живлення постійного струму
2

Pump out the air

Put the hafnium iodide in the vessel and pump out the air and any other gas that would spoil the reaction.

Матеріали для цього кроку:

Йодид гафніюЙодид гафнію1 as required

Необхідні інструменти ({count})

Вакуумний насосВакуумний насос
3

Evaporate the iodide

Heat the vessel until the iodide gives enough vapour. The patent gives 400-600 °C only for zirconium iodide; for hafnium iodide the temperature is not given. Ours: a furnace round the vessel.

Необхідні інструменти ({count})

Трубчаста пічТрубчаста піч
4

Deposit hafnium on the white-hot wire

Pass a current through the wire to heat it beyond 1600 °C while the iodide vapour flows along it. The iodide splits and hafnium deposits on the wire. Do not overheat: the deposit can alloy with the wire.

Необхідні інструменти ({count})

Джерело живлення постійного струмуДжерело живлення постійного струму
ПірометрПірометр
Вольфрамовий дрітВольфрамовий дріт

Матеріали

1

Необхідні інструменти

6

За цим кресленням виготовляють

CC0 Суспільне надбання

Це креслення випущено під ліцензією CC0. Ви можете вільно копіювати, змінювати, поширювати та використовувати цю роботу для будь-яких цілей без запиту дозволу.

Підтримайте мейкера, купуючи продукти через його креслення, де він отримує Комісію мейкера встановлену вендорами, або створіть нову ітерацію цього креслення та включіть його як зв'язок у власне креслення для розподілу доходу.

Обговорення

(0)

Увійти щоб приєднатися до обговорення

Завантаження коментарів...