Співпраця
МИСТЕЦТВО
КРАСА ТА ЗДОРОВ'Я
РЕМЕСЛО
КУЛЬТУРА ТА ІСТОРІЯ
РОЗВАГИ
СЕРЕДОВИЩЕ
ЇЖА ТА НАПІЇ
ЗБОРНА ІНЖЕНЕРІЯ
НАУК
СПОРТ
ТЕХНОЛОГІЯ
НОСИМО
Saddler's Stitching Clam From Two Oak Barrel Staves on a Dovetailed Deal Base (Hasluck, Harness Making, 1904)
Woody

Створено

Woody

14. листопад 2026NO
6
0
0
0
0

Saddler's Stitching Clam From Two Oak Barrel Staves on a Dovetailed Deal Base (Hasluck, Harness Making, 1904)

The home-made saddler's clamp from P. N. Hasluck's Harness Making (1904): two curved oak barrel staves, 2 ft long, screwed into a dovetail tenon on a 20 in deal block so their thinned upper ends spring tightly together as jaws. Held slanting between the knees, it grips the work while both hands stitch.
Середній
About half a day

Інструкції

1

Parts in centimetres

Завантаження блокнота Jupyter…
2

Read Harness Making

"A clamp can be made easily by the worker at home."
3

Shape the staves

Cut two oak cask or barrel staves 2 ft long and at least 3 in wide, the most curved part in the centre (the more bent, the more useful). Clean the outside with a spokeshave, leaving one end the full thickness (about 1 in) and thinning gradually to about 3/4 in toward the upper ends, which form the jaws (Fig. 55). Round the outer corners, flatten the inside, and glass-paper both sides.

Матеріали для цього кроку:

Бондарна клепкаБондарна клепка2 штук

Необхідні інструменти ({count})

Ручна пилкаРучна пилка
СтругСтруг
Наждачний папірНаждачний папір
4

Cut the base

Cut the lower part C from sound white deal, 20 by 3 by 3 in, with a dovetail-shaped tenon at least 6 in long. Fit the shoulders and the width of its upper end to the curve of your staves so that it takes energetic screwing to bring the staves home and their jaws press tightly together.

Матеріали для цього кроку:

Соснова дошкаСоснова дошка1 штука

Необхідні інструменти ({count})

Ручна пилкаРучна пилка
СтамескиСтамески
Дерев'яний молоток (киянка)Дерев'яний молоток (киянка)
Ручний рубанокРучний рубанок
5

Screw together

Screw the staves to the tenon with eight stout 2-1/4 in screws, countersunk flush (Fig. 54).

Матеріали для цього кроку:

Шурупи по деревуШурупи по дереву8 штук

Необхідні інструменти ({count})

Коловорот із перкоюКоловорот із перкою
Набір зенківокНабір зенківок
Викрутка пласкаВикрутка пласка
6

Use it

Hold the clamp slanting between the knees, resting against the left knee, with the right leg thrown over it, so the work is held fast between the jaws and both hands are free for the awl and two needles.
7

Troubleshooting

Clamp troubleshooting.

Flow

Loading...
8

History and honest limits

From Paul N. Hasluck, **Harness Making** (1904), "Harness-makers' Tools" (checked on the archive.org scan harnessmaking00hasl, pp. 24-27). The tools and metric figures are ours.

Матеріали

3

Необхідні інструменти

9

За цим кресленням виготовляють

CC0 Суспільне надбання

Це креслення випущено під ліцензією CC0. Ви можете вільно копіювати, змінювати, поширювати та використовувати цю роботу для будь-яких цілей без запиту дозволу.

Підтримайте мейкера, купуючи продукти через його креслення, де він отримує Комісію мейкера встановлену вендорами, або створіть нову ітерацію цього креслення та включіть його як зв'язок у власне креслення для розподілу доходу.

Обговорення

(0)

Увійти щоб приєднатися до обговорення

Завантаження коментарів...