
Alloying Bronze (Cu + Sn) — The Bronze Age Begins
The alloy that gave an entire era its name. Mix 88-90% copper with 10-12% tin to create bronze — harder than either component, castable into complex shapes, and the dominant material of human civilization for 2,000 years. This blueprint covers the metallurgical principles of alloying and casting a bronze tool.
Інструкції
Prerequisite: Smelting Copper
Prerequisite: Smelting Copper
You need copper ingots — the base metal for bronze alloy.

Необхідне креслення
Smelting Copper from Malachite — The Birth of Metallurgy
The moment everything changed. Around 5000 BCE, someone noticed that green malachite stones near a charcoal fire produced shiny red metal. This is the blueprint that separates the Stone Age from the Metal Age. You will reduce copper carbonate ore to pure copper using charcoal and a kiln.
Prerequisite: Casting Copper Tools
Prerequisite: Casting Copper Tools
You need casting technique from this blueprint to shape bronze.

Необхідне креслення
Casting Copper Tools — Shaping the First Metal
With smelted copper in hand, learn to cast it into functional tools using open molds carved from stone or shaped from clay. This blueprint covers the lost-art of ancient casting — the same techniques used to create the Ötzi the Iceman's copper axe (3300 BCE).
Prerequisite: Extracting Tin
Prerequisite: Extracting Tin
You need tin — the critical alloying element. Tin was the strategic resource of the Bronze Age.

Необхідне креслення
Extracting Tin from Cassiterite — The Missing Ingredient
Tin was the rarest ingredient of the Bronze Age — entire trade networks spanning thousands of kilometres existed solely to transport it. Learn to smelt cassiterite (SnO₂) into pure tin. This is surprisingly easy (tin smelts at only 232°C), yet its scarcity shaped the geopolitics of the ancient world.
Metallurgy of Bronze
Metallurgy of Bronze
Why Bronze is Superior
Bronze is a solid solution alloy — tin atoms dissolve into the copper crystal lattice, distorting it and blocking dislocation movement. Result:
| Property | Copper | Bronze (10% Sn) | Improvement |
|---|---|---|---|
| Vickers Hardness | 40-50 | 70-150 | 2-3× harder |
| Tensile Strength | 210 MPa | 300-500 MPa | 2× stronger |
| Melting Point | 1085°C | ~950°C | Easier to melt! |
| Castability | Poor (gassy) | Excellent (fluid) | Complex shapes |
| Corrosion | Forms green patina | Highly resistant | Lasts millennia |
The Ideal Ratio
Ancient smiths converged on ~10% tin, 90% copper through trial and error:
- <8% tin: Too soft, barely better than copper
- 10-12% tin: Optimal hardness, good castability, golden colour
- 15-20% tin: Very hard but brittle — good for bells and mirrors, bad for tools
- >20% tin: Extremely brittle, shatters on impact
The Alloying Process
The Alloying Process
Preparation
- Weigh your metals: 900g copper + 100g tin for classic 10% bronze.
- Cut copper into small pieces (1-2cm) for faster melting.
- Tin can be in any form — it melts so fast it dissolves almost instantly.
Melting Sequence (CRITICAL)
- Melt the copper first. Load copper into pre-heated crucible in the kiln. Bring to full liquid (1085°C+).
- Add tin LAST. When copper is fully molten, add tin to the surface. Tin melts instantly (232°C) and dissolves into the copper.
- Stir with a pre-heated dry stick or ceramic rod. Ensure uniform mixing — 10 seconds of stirring is enough.
- NEVER add copper to molten tin — the temperature differential causes violent boiling and spatter.
Signs of Good Bronze
- Surface should be bright and mirror-like when fully liquid
- Colour: golden-yellow (not coppery red = too little tin, not silvery = too much tin)
- Flows smoothly when poured — bronze is more fluid than pure copper
Pour
- Skim slag from surface.
- Pour into pre-heated mold in one continuous stream.
- Bronze has excellent castability — it fills fine details that pure copper cannot.
Finishing and the Innovation Leap
Finishing and the Innovation Leap
Post-Casting
- Allow to cool naturally in the mold.
- Remove from mold, break off sprues.
- Cold-work the edges: bronze work-hardens even more effectively than copper.
- Grind and polish the working edge.
Testing Your Bronze
- Ring test: Strike with a stick — good bronze produces a clear, bell-like ring. Dull thud = bad alloy or porosity.
- Edge test: A bronze axe keeps its edge 3-5× longer than copper.
- Colour: Golden-yellow when polished. Develops green patina over time (same as the Statue of Liberty).
The Civilization Impact
Bronze changed everything:
- Agriculture: Bronze ploughshares broke harder soil → more food → larger populations
- Warfare: Bronze swords and armour dominated for 2,000 years
- Art: Bronze casting enabled the first complex sculptures (lost-wax casting)
- Trade: Tin scarcity created the first long-distance trade networks
But bronze has a fatal flaw: tin scarcity. When the Bronze Age trade networks collapsed (~1200 BCE), civilizations that couldn't get tin were forced to master a harder, more abundant metal — iron. See Blueprint 08: Building a Bloomery & Smelting Iron.
Матеріали
- •Copper (smelted or purchased) - 900 gsЗаповнювач
- •Tin (smelted or purchased) - 100 gsЗаповнювач
- •Charcoal - 12 kgsЗаповнювач
- •Crucible - 1 pieceЗаповнювач
- •Lost Wax Casting Kit - 1 kitЗаповнювач
- •Aluminum Bronze C954 (Reference) - 1 referenceЗаповнювач
Необхідні інструменти
- Kiln (from Blueprint 02)Заповнювач
- BellowsЗаповнювач
- Crucible tongsЗаповнювач
- Casting moldЗаповнювач
- AnvilЗаповнювач
- Ball peen hammerЗаповнювач
Матеріали з пов'язаних креслень
CC0 Суспільне надбання
Це креслення випущено під ліцензією CC0. Ви можете вільно копіювати, змінювати, поширювати та використовувати цю роботу для будь-яких цілей без запиту дозволу.
Підтримайте мейкера, купуючи продукти через його креслення, де він отримує Комісію мейкера встановлену вендорами, або створіть нову ітерацію цього креслення та включіть його як зв'язок у власне креслення для розподілу доходу.