МИСТЕЦТВО
КРАСА ТА ЗДОРОВ'Я
РЕМЕСЛО
КУЛЬТУРА ТА ІСТОРІЯ
РОЗВАГИ
СЕРЕДОВИЩЕ
ЇЖА ТА НАПІЇ
ЗБОРНА ІНЖЕНЕРІЯ
НАУК
СПОРТ
ТЕХНОЛОГІЯ
НОСИМО
Lidded Storage Jar: a Coil-Built Pot with a Fitted Flanged Lid
Mary

Створено

Mary

14. жовтень 2026FI
22
0
0
0
0

Lidded Storage Jar: a Coil-Built Pot with a Fitted Flanged Lid

Fired clay does not rust, react with salts or let light through, which is why herbs, pigments and remedies were kept in clay jars. This is our coil pot with a straight neck and a lid that sits inside it on a flange, made from the same clay at the same time so both shrink alike. The picture: a lidded earthenware jar with a horn handle, Korea, Silla or Kaya period (Cleveland Museum of Art).
Середній
A week with drying and firing

Інструкції

1

Wedge the clay

Wedge about 3 kg of clay body for the jar and its lid together, so both come from the same batch (the amount is ours, for a jar about 15 cm tall).

Матеріали для цього кроку:

Гончарна глиняна масаГончарна глиняна маса3 кг

Необхідні інструменти ({count})

Робоча парусина для керамікиРобоча парусина для кераміки
НіжНіж
2

Build the jar

Build a coil pot as in the coil pot blueprint, but bring the neck up straight and finish the rim level all round, so a lid can sit on it.
3

Make the lid

While the jar is still soft, roll a disc a little wider than the mouth. Measure the inside of the neck and add a coil ring underneath the disc that just fits inside it: the flange that keeps the lid from sliding. Score, slip and join it, and add a knob on top.

Матеріали для цього кроку:

Шлікер (рідка глина)Шлікер (рідка глина)1 as required

Необхідні інструменти ({count})

Робоча парусина для керамікиРобоча парусина для кераміки
Інструмент для насічки глиниІнструмент для насічки глини
Набір гончарних інструментівНабір гончарних інструментів
НіжНіж
4

Fit at leather-hard

When jar and lid are both leather-hard, try the lid in place and pare the flange or rim until it seats without rocking. Smooth both with a damp sponge.

Необхідні інструменти ({count})

Набір гончарних інструментівНабір гончарних інструментів
Набір губок для гончарстваНабір губок для гончарства
5

Dry and fire together

Dry them slowly to bone-dry, the lid off the jar, and fire them in the same pit firing as the coil pot, so they shrink alike.

Матеріали для цього кроку:

ДроваДрова1 as required

Необхідні інструменти ({count})

ЛопатаЛопата

Матеріали

3

Необхідні інструменти

6

За цим кресленням виготовляють

Пов'язані креслення

Ці креслення діляться знаннями — техніки, матеріали або принципи

CC0 Суспільне надбання

Це креслення випущено під ліцензією CC0. Ви можете вільно копіювати, змінювати, поширювати та використовувати цю роботу для будь-яких цілей без запиту дозволу.

Підтримайте мейкера, купуючи продукти через його креслення, де він отримує Комісію мейкера встановлену вендорами, або створіть нову ітерацію цього креслення та включіть його як зв'язок у власне креслення для розподілу доходу.

Обговорення

(0)

Увійти щоб приєднатися до обговорення

Завантаження коментарів...