Співпраця
МИСТЕЦТВО
КРАСА ТА ЗДОРОВ'Я
РЕМЕСЛО
КУЛЬТУРА ТА ІСТОРІЯ
РОЗВАГИ
СЕРЕДОВИЩЕ
ЇЖА ТА НАПІЇ
ЗБОРНА ІНЖЕНЕРІЯ
НАУК
СПОРТ
ТЕХНОЛОГІЯ
НОСИМО

Небезпечно
Lutetium Fluoride: Oxide Converted in HF and Argon at 750 °C, then Melted in HF to Remove the Last Oxygen (Henderson, Ames 1970)
Lutetium metal made from its fluoride is only as clean as the fluoride. Henderson converted rare-earth oxides in a stream of hydrogen fluoride and argon at 750 °C, then melted the product in hydrogen fluoride so the last oxide turned to fluoride as well; he found the method good for every rare-earth fluoride from lanthanum to lutetium except europium.
Result: LuF3 with under 50 ppm oxygen, melting at 1184 °C.
Source: D. C. Henderson, The Preparation and Some High Temperature Properties of the Rare Earth Trifluorides (Iowa State University / Ames Laboratory, 1970), pp. 17-34, 67. Anhydrous hydrogen fluoride is deadly and burns deep into skin. Picture drawn by Youblob.
Просунутий
2 days
Небезпечний контент
Це креслення містить небезпечні процедури. Увійдіть та увімкніть небезпечний контент у налаштуваннях облікового запису, щоб переглянути покрокові інструкції.
УвійтиЗа цим кресленням виготовляють
Пов'язані креслення
Ці креслення діляться знаннями — техніки, матеріали або принципи

Небезпечно
Hydrogen Fluoride Gas from Fluorspar and Sulphuric Acid
від Charlie
неорганічні
16
0
0
0
0
0

Небезпечно
Erbium, Ytterbium, Thulium and Lutetium Oxides: Xenotime Separated on Ion Exchange Columns with EDTA and HEDTA (Spedding and Powell, US 2,956,858)
від Charlie
неорганічні
10
0
0
0
0
0

Небезпечно
Terbium Fluoride: Oxide Converted in HF and Argon at 750 °C, then Melted in HF to Remove the Last Oxygen (Henderson, Ames 1970)
від Charlie
неорганічні
10
0
0
0
0
0
CC0 Суспільне надбання
Це креслення випущено під ліцензією CC0. Ви можете вільно копіювати, змінювати, поширювати та використовувати цю роботу для будь-яких цілей без запиту дозволу.
Підтримайте мейкера, купуючи продукти через його креслення, де він отримує Комісію мейкера встановлену вендорами, або створіть нову ітерацію цього креслення та включіть його як зв'язок у власне креслення для розподілу доходу.
