Співпраця
МИСТЕЦТВО
КРАСА ТА ЗДОРОВ'Я
РЕМЕСЛО
КУЛЬТУРА ТА ІСТОРІЯ
РОЗВАГИ
СЕРЕДОВИЩЕ
ЇЖА ТА НАПІЇ
ЗБОРНА ІНЖЕНЕРІЯ
НАУК
СПОРТ
ТЕХНОЛОГІЯ
НОСИМО

Pneumatic Trough with Gas Jars: a Tin Basin and Wide-Mouth Bottles (Woodhull, 1895)
Woodhull's school apparatus for collecting a gas over water: a 6 in block-tin basin serves as the pneumatic trough, and 8 oz wide-mouth bottles as the gas jars. A test-tube with a one-hole stopper and a bent glass delivery tube makes the generator; gas from it bubbles up into a water-filled bottle held mouth-down in the basin.
Result: a pneumatic trough and gas jars for collecting oxygen, hydrogen, carbon dioxide and other gases by displacing water.
Source: J. F. Woodhull, Manual of Home-Made Apparatus (1895), pp. 5, 12-13. Unknown: how the basin is made. Picture: Fig. 16 of the book.
Початківець
Unknown
Інструкції
1
1
Make the basin and get the jars
Make the basin and get the jars
Use a block-tin basin about 6 inches across as the trough, and 8 oz wide-mouth bottles as the gas jars. Ours: a basin soldered from tinplate. Not given: how the basin is made.
Матеріали для цього кроку:
Лист білої жерсті1 basin
Олов'яно-свинцевий припій1 basin seams
Скляна бутля (прозора)6 8 oz wide-mouth gas jarsНеобхідні інструменти ({count})
Ножиці по металу
Паяльник
Невідомий спосіб формування2
2
Fit the generator and collect a gas
Fit the generator and collect a gas
Use a 6 x 3/4 inch test-tube as the retort, with a No. 1 one-hole rubber stopper and a delivery tube of 3/16 inch glass tubing bent to run down into the basin. Fill the basin with water. Fill a bottle with water, close it, turn it mouth-down into the basin and open it under the water. Put the delivery tube's end under its mouth. Heat the test-tube by moving it back and forth through the flame, held in the hand rather than on a stand: the gas bubbles up and drives the water out of the bottle. Close each full bottle under water and lift it out. The same set serves for hydrogen, nitrous oxide, nitric oxide, hydrogen sulphide, carbon dioxide and others.
Необхідні інструменти ({count})
Пробірки
Гумові корки
Скляна відвідна трубка
Пальник БунзенаМатеріали
3- 1 basinЗаповнювач
- 1 basin seamsЗаповнювач
- 6 8 oz wide-mouth gas jarsЗаповнювач
Необхідні інструменти
7- Заповнювач
- 2 vendors sell this, none ship to you yetЗаповнювач
- Заповнювач
- Заповнювач
- Заповнювач
- Заповнювач
- Заповнювач
Матеріали з пов'язаних креслень
За цим кресленням виготовляють
CC0 Суспільне надбання
Це креслення випущено під ліцензією CC0. Ви можете вільно копіювати, змінювати, поширювати та використовувати цю роботу для будь-яких цілей без запиту дозволу.
Підтримайте мейкера, купуючи продукти через його креслення, де він отримує Комісію мейкера встановлену вендорами, або створіть нову ітерацію цього креслення та включіть його як зв'язок у власне креслення для розподілу доходу.


