
Preparing a Yarrow Wound Poultice — Prehistoric Herbal First Aid
Інструкції
Locate Yarrow in Its Natural Habitat
Locate Yarrow in Its Natural Habitat
Identify Yarrow by Its Feathery Leaves
Identify Yarrow by Its Feathery Leaves
Confirm by Flower Head Shape
Confirm by Flower Head Shape
Verify by Scent
Verify by Scent
Harvest Leaves and Flower Heads
Harvest Leaves and Flower Heads
Матеріали для цього кроку:
Yarrow (Achillea millefolium)50 гRinse the Harvested Yarrow
Rinse the Harvested Yarrow
Матеріали для цього кроку:
Clean Water500 млSeparate Leaves and Flowers from Stems
Separate Leaves and Flowers from Stems
Place Yarrow on a Flat Stone Surface
Place Yarrow on a Flat Stone Surface
Необхідні інструменти ({count})
Flat Stone SlabCrush the Leaves with a Smooth Stone
Crush the Leaves with a Smooth Stone
Необхідні інструменти ({count})
Smooth StoneAdd Flower Heads and Continue Crushing
Add Flower Heads and Continue Crushing
Add a Few Drops of Water If Needed
Add a Few Drops of Water If Needed
Матеріали для цього кроку:
Clean Water20 млClean the Wound with Water
Clean the Wound with Water
Матеріали для цього кроку:
Clean Water200 млApply the Yarrow Paste Directly to the Wound
Apply the Yarrow Paste Directly to the Wound
Cover with a Broad Leaf
Cover with a Broad Leaf
Матеріали для цього кроку:
Broad Dock Leaf2 штукBind the Poultice with Plant Fiber Cordage
Bind the Poultice with Plant Fiber Cordage
Матеріали для цього кроку:
Cordage1 метрCheck the Poultice After One Hour
Check the Poultice After One Hour
Replace with Fresh Poultice Every Few Hours
Replace with Fresh Poultice Every Few Hours
Матеріали для цього кроку:
Yarrow (Achillea millefolium)50 гМатеріали
4- Заповнювач
- 720 млЗаповнювач
- 2 штукЗаповнювач
- 1 метрЗаповнювач
Необхідні інструменти
2- Заповнювач
- Заповнювач
Матеріали з пов'язаних креслень
Пов'язані креслення
Ці креслення діляться знаннями — техніки, матеріали або принципи
Related blueprints
Other builds that share materials, tools, or techniques with this one.






CC0 Суспільне надбання
Це креслення випущено під ліцензією CC0. Ви можете вільно копіювати, змінювати, поширювати та використовувати цю роботу для будь-яких цілей без запиту дозволу.
Підтримайте мейкера, купуючи продукти через його креслення, де він отримує Комісію мейкера встановлену вендорами, або створіть нову ітерацію цього креслення та включіть його як зв'язок у власне креслення для розподілу доходу.